Stop Mode Setup

You can set whether pressing the STOP button during play list playback should return you to the play list after playback or not. Use the following procedure to make the desired setting.

1 Open the play list screen.

2 Press the MENU button.

3 Use the cursor buttons to choose [SETTING] – [STOP MODE].4 Select [RETURN] or [STAY] and press the SET button.

RETURN: A return is made to the play list screen when the STOP is pressed (or when an automatic stop occurs at the start or end of all events). The cursor position moves to the event where the button was pressed.

STAY: A return to the play list screen is not made and a still picture is output when the STOP button is pressed (or when an automatic stop occurs at the start or end of all events).

To return to the event list after making this setting, press the PLAY LIST button or the EXIT button.

5 Press the MENU button to end setup.

◆NOTE:

•STAY is the recommended setting during playback of a play list from an external controller or other device connected to the remote control connector.

List Play Using

Using Play List: Play List Function 73