Panasonic AJ-HPM110E, AJ-HPM110P manual 144

TCG	Menu *4	Menu	Selected video	Recorded time code
switch *5	No. 507 EXT	No. 518 VITC	input signal	SBC area	VAUX area
	TC SEL	GEN
			1394		Time code on IEEE1394 digital input
					(VAUX area)
		OFF
INT			HD SDI	Internal TCG value	SVITC on input video signal *3
			CMPST / SD SDI		VITC on input video signal *3
(REGEN /	---
					Time code on IEEE1394 digital input
PRESET)			1394
					(VAUX area)
		ON
			HD SDI	Internal TCG value
			CMPST / SD SDI
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		OFF
			HD SDI	Time code on TIME CODE IN	SVITC on input video signal *3
				connector input *1
	EXT_L		CMPST / SD SDI		VITC on input video signal *3
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		ON
			HD SDI	Time code on TIME CODE IN connector input *1
			CMPST / SD SDI
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		OFF
			HD SDI	SLTC on input video signal *2	SVITC on input video signal *3
EXT	SLTC		CMPST / SD SDI	VITC on input video signal *2	VITC on input video signal *3
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		ON
			HD SDI	SLTC on input video signal *2
			CMPST / SD SDI	VITC on input video signal *2
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		OFF
			HD SDI	SVITC on input video signal *2	SVITC on input video signal *3
	SVITC		CMPST / SD SDI	VITC on input video signal *2	VITC on input video signal *3
			1394	Time code on IEEE1394 digital input	Time code on IEEE1394 digital input
				(SBC area)	(VAUX area)
		ON
			HD SDI	SVITC on input video signal *2
			CMPST / SD SDI	VITC on input video signal *2

*1: The internal TCG value is used when a signal cannot be detected from the TIME CODE IN connector input.

*2: The internal TCG value is used when the SLTC, SVITC and VITC cannot be detected on the input video signal.

*3: Nothing is recorded if the SVITC and VITC cannot be detected on the input video signal.

*4: In modes other than 59.94 Hz and 50 Hz, setup menu No. 507 EXT TC SEL does not appear. The unit is locked in SLTC in this mode.

*5: When setup menu No. 040 VFR REC is set to ON, REC RUN is selected regardless of the TCG switch setting.

144 Setup: Time Code, User Bit and CTL