Panasonic AJ-HPM110E, AJ-HPM110P Using the RS-422Ainterface, Using the IEEE1394 interface, button, button, devices, devices, Automatic Recording of Cards, 2 Select an area for capture

Automatic Recording of Cards

	Using the RS-422A interface		Using the IEEE1394 interface
Registering IN and OUT points makes possible automatic		Audio and video played back from the current location can be
recording (AUTO CAPTURE) between those two points.		recorded to a card.
1 Enter the mode that permits control of external		1 Enter the mode that permits control of external
	devices.		devices.
	Press the EVENT button when the THUMBNAIL and PLAY		Hold down the SHIFT button and press the EVENT button
	LIST buttons are off.		when the THUMBNAIL and PLAY LIST buttons are off.

2 Select an area for capture.

•Use the following buttons to select an area for capture.

IN+ENTRY	Registers IN points
IN+RESET	Deletes IN points
OUT+ENTRY	Registers OUT points
OUT+RESET	Deletes OUT points
IN+GOTO	Sends a CUE-UP command to move to an
	IN point
OUT+GOTO	Sends a CUE-UP command to move to an
	OUT point
IN	Checks an IN point (counter indication)
OUT	Checks an OUT point (counter indication)
IN+OUT	Checks a DUR (counter indication)

3 Hold down the SHIFT button and press the REC

button.

•The specified area is automatically registered on the card.

•The EVENT button flashes during operation.

•The current point is registered as an IN point if an IN point has not been registered.

•Recording stops automatically when the OUT point is reached.

If an OUT point has not been registered, recording continues until the STOP button is pressed.

2 Select the start of a section you want to capture.

•Use the PLAY, STILL or other buttons to locate the start

of the section you want to capture.

3 Hold down the SHIFT button and press the REC

button.

•Start playback on the external device to start recording.

•To end recording, press the STOP button.

◆NOTE:

•The accuracy of recording start varies with the connected external device.

114 Using USB Connectors and SD/SDHC Memory Cards: External Remote Control