Panasonic AJ-HPM110E, AJ-HPM110P manual TIME CODE

TIME CODE

This menu sets the time code.

						* An underlined setting indicates an initial value.
	Item		Setting
						Settings and brief function description
FR	SUPER	FR		SUPER
No.	DISP.	No.		DISP.
		0000		BLANK	59.94Hz	50Hz 29.97Hz 25Hz only
		0001		THRU
					Specifies whether or not a VITC signal will be output at the positions selected in menu No.
					501 VITC POS-1 and No. 502 VITC POS-2 during playback.
500	VITC BLANK				0: VITC signals are not output.
					1: VITC signals are output.

NOTE:

•This setting is available only during analog composite output and SD SDI output.

•In EE mode, the input signal is output with the VITC signal.

		When set to 59.94 Hz,			59.94Hz	50Hz	29.97Hz	25Hz	only
		29.97 Hz
					Specifies the position where the VITC signal will be inserted.
		0000		10L	NOTE:
			• You cannot select the same line as in menu No. 502 VITC POS-2.
		0006							16L
				• This setting is available only during analog composite output and SD SDI output.
501	VITC POS-1	0010		20L
		When set to 50 Hz,
			25 Hz
		0000		7L
		0004		11L
		0015		22L
		When set to 59.94 Hz,			59.94Hz	50Hz	29.97Hz	25Hz	only
		29.97 Hz
					Specifies the position where the VITC signal will be inserted.
		0000		10L	NOTE:
			• You cannot select the same line as in menu No. 501 VITC POS-1.
		0008							18L
				• This setting is available only during analog composite output and SD SDI output.
502	VITC POS-2	0010		20L
		When set to 50 Hz,
			25 Hz
		0000		7L
		0006		13L
		0015		22L
		0000		REC Specifies an operating mode that advances the internal time code generator.
		0001		FREE	0: The internal time code generator is advanced only during recording.
					1: When the power is on, the internal time code generator is advanced regardless of
504	RUN MODE				operating mode.
					NOTE:
					• When menu No. 040 VFR REC is set to ON, the time code advances only during
					recording even when FREE is selected.
		0000		TC&UB	Specifies the signal to regenerate when the time code generator (TCG) is in the REGEN
		0001		TC	mode.
505	TCG REGEN	0002		UB	0: Regenerates both the time code and the user bit
					1: Regenerates only the time code
					2: Regenerates only the user bit

128 Setup: Item Settings