Open the play list screen.
Press the MENU button.

Creating New Clips From the Play List (Edit Copy)

You can use the play list to create a new clip.

This function is called edit copy.

◆NOTE:

•The playback time code setting allows you to start the time code from a set value after edit copy. Set the playback time code as necessary.

➝For details, refer to “Setting the Playback Time Code (TC)” (page 100).

•Play list files created on the AJ-SPD850 can be loaded but not edited. However, edit copy becomes available after saving the file under another name using SAVE AS.

1

2

3 Use the cursor buttons to choose [OPERATION] – [EDIT COPY].

4 Select the number of the P2 card slot that will store the edit copy data and press the SET button.

5 Select [YES] and press the SET button.

◆NOTE:

•If total free space on an inserted P2 card is not sufficient to store edit copy data, the message “WARNING: LACK OF REC CAPACITY!” appears and edit copy does not start.

•Edit copying indicates its approximate progress during operation.

•Use the SET button or the CANCEL button to cancel an ongoing edit copy operation.

•Text memos are automatically inserted at the edit points (the start of each event) of edit-copied clips.

•Edit copying does not copy any information other than the user clip name.

•The presence of different aspect ratios in the data will generate an error.

•Edit copy will copy only events that can be played back.

•Do not remove a P2 card that is being accessed (the LED of the related P2 card slot flashes).

•When the specified card does not have enough space to store all the data, the remaining data is automatically copied to a P2 card in the next number slot. The number of the slots where the data is copied is displayed during copying or when copying ends.

This starts edit copy.

102 Using Play List: Creating New Clips From the Play List (Edit Copy)