Changing Settings

The menus on the LCD monitor or a monitor (when the SUPER switch on the right side of the LCD monitor is set to “ON”) connected to the ANALOG COMPOSITE MONITOR OUT connector make it possible to change settings.

Change Operations

4

5

5

3,4

1,5

2

3,4

Select the item to change, hold down the STILL/PAUSE button and turn the search dial or press the left (b) or

right (a) button to change the setting.

•Turn the dial clockwise (or press the right (a) button) to increment the set number and turn it counterclockwise (or press the left (b) button) to decrement it.

•Release the STILL/PAUSE button after making the change.

•In the SHTL mode, set the search dial to the center position or items will move.

•Repeat the operations described in steps 3 and 4 when there are more items to change.

5 Finalize the change.

Press the MENU button.

In the confirmation message that appears, press the SET button to accept the change or press the EXIT button to cancel it. The menu closes after this operation.

1 Press the MENU button.

The setup menu screen appears on the LCD monitor and the counter display indicates the setup menu number.

2 Select the file to change.

Hold down the SHIFT button and press the FF button or the REW button to switch to the next or previous file.

3 Select items to change.

Turn the search dial or press the up (▲) or down (▼) buttons to move the cursor (*) to the item you want to change.

•Use the search dial in JOG mode.

•Turn the dial clockwise to increment item numbers (001➝002➝003➝004➝) and counterclockwise to decrement them.

•To switch to the next item, hold down the PLAY button and press the FF button or the + button. To switch to a previous item, hold down the PLAY button and press the REW button or the – button.

4 Change set values.

Making changes using the PF buttons

1,32

You can assign three of the items that are most often changed to the PF buttons to enable quick changes of the setting values.

116 Setup: Changing Settings