2. Input/output signal settings

2-5-5. Setting the level meters

Level meters for the embedded audio signals transferred by the SDI input can be displayed on the split screens.

Left display:

Channel 1 of group 1

Right display:

Channel 2 of group 1

1Press the xbutton to light its indicator, and display the Multi View Display menu.

2Use [F1] to display the Display sub menu.

2-5-7. Setting the markers

Safety markers can be displayed for the multi view materials. The markers can be displayed when PGM or PVW materials are to be displayed in half their original size.

4Split

Sub screens 1 to 4

5/6/10Split

1 or 2 sub screens

1On the Display sub menu, use [F4] to set the marker display using the Marker item.

3Use [F2] to set the level meter display using the Level Meter item.

On

The level meters are displayed.

Off

The level meters are not displayed.

4:3

The markers are displayed using the 4:3

 

aspect ratio.

16:9

The markers are displayed using the 16:9

 

aspect ratio.

Off

The markers are not displayed.

2-5-6. Setting the input signal marks

The status of the input signals can be displayed in front of the material names displayed on the split screens.

“F” mark:

This appears when the input signals are frozen.

“ ! ” mark:

This appears when no signals are input or when signals with different formats are input.

ppWhen the “F” mark is displayed, the “!” mark is not displayed.

1On the Display sub menu, use [F3] to set the input signal status display using the Input Status item.

On

The input signal status is displayed.

Off

The input signal status is not displayed.

2Use [F5] to set the size of the markers using the Marker Size item.

2-5-8. High-resolution multi view mode

The image output on a multi view display can be output in high resolution to DVI-D output.

pp These settings can be established when the system mode is set to SD.

1 Press the sbutton to light its indicator, and display the System menu.

2 Use [F1] to display the Format sub menu.

3Use [F3] to set “On” or “Off” using the Hi Resolution item, and press the [F3].

ppTurning this setting “On” switches the Source item to the default value if the following output signals in the Source item of the Assign submenu under the Output menu are set to “MV”.

SDI OUT1 to SDI OUT5, OUT-A1, OUT-A2,

OUT-B1, OUT-B2

ppTurning this setting “On”, while the multi view display signal is output to the AUX bus or DISP bus, switches the output signal to the black signal (internally generated signal).

100