1. Basic operations

Setting the event switching effect (Path)

Switching from one event to another (bus switching) can be accomplished smoothly.

1Press the ebutton to light its indicator, and display the Event Memory menu.

2Use [F1] to display the Path sub menu.

3Use [F2] to set the effect to be used for switching images using the Effect item.

Dissolve

The images are switched using the dissolve

 

effect.

Cut

The images are switched using the cut effect.

ppThe dissolve effect duration is set in the Effect Dissolve sub menu which is selected on the Time menu.

4Use [F3] to set the PinP bus transition using the PinP Bus item.

Dissolve

The PinP bus images are switched using the

 

dissolve effect.

Cut

The PinP bus images are switched using the

 

cut effect.

5Use [F4] to select the path to be used for switching the images using the Trans Path item.

The following transitions are targeted.

ppWidth of the borders

ppSoft effect of the borders ppColors of the borders ppPositions of the images ppTrimming values

Linear

The switching from one image to another is

 

interpolated linearly.

Step

The parameters are updated when the events

 

are passed through.

6Use [F5] to select the effect when the colors are switched using the Hue Path item.

The following hues are targeted.

ppColors of the color background ppColors of the borders ppColors of the edges ppColors of the fill matte

Short

The colors are changed toward less hue on

 

the vectorscope.

Long

The colors are changed toward more hue on

 

the vectorscope.

CW

The Hue is changed clockwise on the

 

vectorscope.

CCW

The Hue is changed counterclockwise on the

 

vectorscope.

Step

The color changes are updated when an

 

event is passed through.

58