Panasonic AV-HS410N ww Output from the GPI Output port

4. External interfaces

ww Output from the GPI Output port

	Assign Item	Description of function assigned	Output

	CUT	Cut transition executed

	KEY ON	Key transition start

	DSK ON	DSK transition start

	PinP1 ON	PinP1 transition start	Low pulses are output

	PinP2 ON	PinP2 transition start
	PinP2 ON	PinP2 transition start	(approx. 50 to 60 ms).

	FTB ON	FTB transition start
	FTB ON	FTB transition start

	BKGD CUT	Cut transition for the background executed

	KEY CUT	Cut transition for a key executed

	EVENTMEM	Event set by event memory executed

	AUTO	Auto transition execution in progress

	BKGD AUTO	Auto transition execution in progress for background

	KEY AUTO	Auto transition execution in progress for key

	KEY Trans	Transition execution in progress for key	A low level is output.

	DSK Trans	Transition execution in progress for DSK
	DSK Trans	Transition execution in progress for DSK

	PinP1 Trans	Transition execution in progress for PinP1

	PinP2 Trans	Transition execution in progress for PinP2

	FTB Trans	Transition execution in progress for FTB

	REDTly1 to 13	Red tally for INPUT1 to INPUT131	A low level is output during tally
	GRNTly1 to 13	Green tally for INPUT1 to INPUT131	output.
	AUXTly1 to 13	When INPUT1 to INPUT131 have been selected by the AUX bus	A low level is output while the inputs
		 Select the AUX buses (AUX1 to AUX4) whose signals are to be	A low level is output while the inputs
			are selected.
		output using the menu.	are selected.
		output using the menu.

	No Assign	No function assigned

1: The following inputs are used for INPUT1 to INPUT13.

ppINPUT1 to INPUT8: SDI IN1 to SDI IN8

pp INPUT9:

DVI IN

ppINPUT10, INPUT11: IN A1, IN A2 pp INPUT12, INPUT13: IN B1, IN B2

ppWhen a plug-in software application is introduced, the functions inherent to that application are sometimes added as the functions which are assigned.2

2: This function can be actuated in any model whose system version is V2.00.00 and up. These operations cannot be performed in a model with a system version of below V2.00.00.

113

Contents

Page Trademarks and registered trademarks Abbreviations About copyright and licence Illustrations and screen displays featured in the manual Before use 1. Basic operations 2. Input/output signal settings 3. System settings 4. External interfaces 5. Setting menu table Appendix (glossary) wwOverview wwConcerning the ratings display wwDisclaimer of warranty wwNetwork security wwConcerning differences in the system versions qqHow to check the system version qqRestrictions on menus and functions [Restrictions on menus] Menu 1-1.Background transition Single SHIFT ww Allocatingxthe SHIFT function 1-1-3.Selecting the bus mode A/B PGM-A PST-B PGM-B 1-1-5.Manual transition 1-1-7.Cut transition 1-1-6.Auto transition 1-2.Wipe wwTable of wipe patterns 1-2-2.Selecting the wipe direction When the [R] indicator is off: When the [R] indicator is lit: When the [N/R] indicator is lit: 1-2-3.Wipe decorations (border, soft effect) 1-2-4.Setting the wipe start position Target patterns: <X-Pos,Y-Possetting range 1-2-5.Modifying wipe Setting the 3D (page turning) effect Setting the trimming 16:9 (On) 4:3Smth 1-2-6.Setting the latency 1F Fix Minimum  BKGD items Delay amount 1-3.Key Key PinP1 PinP2 DSK 1-3-2.Selecting the key material Selecting the key fill and key source signals <Selecting the key fill signal <Selecting the key source signal Setting the fill matte color 1-3-3.Key transitions Reverse <Pattern examples Key auto transition 1-3-4.Key preview User button 1-3-5.Adjusting the luminance key and linear key Operation Description of setting 1-3-6.Adjusting the chroma key ww To execute theksampling automatically w wTo execute theksampling manually Select BG Page Spill Sponge Composite Proc.FG [Spill–][Spill+] Spill [Matte–][Matte+] Matte [Detail–][Detail+] Detail [Matte Sponge] [Make FG Trans] [Restore Detail] [FineTuning] 1-3-7.Key decorations Setting the key edge Drop Shadow Selecting the Edge Fill settings 1-3-8.Masking the key signals <Key mask setting 1-3-9.Flying key PinP combinations using the flying key 1-3-10.Setting the priority Low Middle 1-4.PinP (picture in picture) 1-4-3.Selecting Shape 1-4-4.PinP preview 1-4-5.PinP transitions 1-4-6.PinP adjustments Adjusting the PinP position and size Select the dot by dot mode SD HD 1-4-7.Linking PinP1 and PinP2 Setting the priority Linking PinP1 and PinP2 When “X” has been selected as the Symmetry setting When “Y” has been selected as the Symmetry setting 1-4-8.PinP decorations Fix 1-4-9.Trimming settings Free <Trimming settings Pair 1-5.DSK (downstream key) 1-5-2.Selecting the DSK material Selecting the DSK fill signal and DSK source signal <Selecting the DSK fill signal <Selecting the DSK source signal 1-5-3.DSK transitions 1-5-4.DSK preview 1-5-5.DSK adjustments 1-5-6.DSK decorations Setting the edge Setting Edge Fill 1-5-7.Masking the DSK signals <DSK mask setting 1-6.Key Link 1-7.FTB (Fade to Black) 1-8.Internal color signals Adjusting the Wash waveforms Sine Saw Setting the Wash movements Roll 1-9.Switching the AUX output 1-9-3.Setting enable/disable for the AUX1 transition 1-10.Memory 1-10-1.Memory registration and recall items Applicable bus Material selection Transition Pattern 1-10-3.Recalling the operations stored in the memory (Recall) 1-10-4.Memory preview Shot memory Recalled Memory preview bus Program bus 1-10-5.Deleting the operations stored in the memory (Delete) Selecting the buses for registering memories <Example of memory information display Selecting the buses for playing back memory settings 1-10-7.Registering the material selection items 1-10-8.Setting effect dissolve (shot memory) Cut Short 1-10-9.Editing event memory timelines Timeline Event points and edit points <Event points and edit points Edit point Setting the playback method Setting the playback mode Setting the display mode Repeat Wide <Timeline displays (on the built-indisplay)  Number key operations Inserting events (Insert) Modifying events (Modify) Copying events (Copy) Pasting events (Paste) Deleting events (Delete) Setting events using the menus Registering marks PAUSE CLIP Setting the event duration Setting the event switching effect (Path) 1-10-10.Registering memories (Register) Changing the names of the memories Copying memories 1-11.Video memories 1-11-1.Recording still images (Still) 1-11-2.Recordingv moving images (Clip) 1-11-3.Saving Images in Flash Memory  1-11-4.Playing back moving images (Clip) Establishing the playback mode Lead Last Speeds which can be selected: Moving to the first frame or last frame Trimming moving images Operations performed using the number keys Displaying thumbnails 1-12.Memory card Video memory (still image data: Still1, Still2): Video memories (moving image data: Clip1, Clip2): Shot memory data (Shot): Event memory data (Event): <Data folder configuration Data type SELECT item Storage folder Extension 1-12-1.Initializing the memory cards the card must be initialized by the unit without fail 1-12-2.Saving data on memory cards 1-12-3.Loading data from memory cards 1-12-4.Deleting files on memory cards 1-12-5.Displaying the memory card information 1-13.Waveform monitor settings 1-14.Setting the status display 2-1.Input signal settings <List of settings by input signal Input connector Converter Gain (SDI) 2-1-1.Setting the frame synchronizer 2-1-2.Setting the input mode Dot by Dot Up Convert <List of input modes supported Input 2-1-3.Setting the delay amount 2-1-4.Freezing the input signals Setting freeze 2-1-5.Setting the material names 2-1-6.Setting the up-converter Edge Crop Fine-tuningof image positions Center Setting the gamut limiter 2-1-7.Setting the video process function 2-1-8.Setting the analog input gain (option) 2-1-9.Setting the analog composite input signals (option) 2-1-10.Setting the DVI input signals DVI input signals DVI Input Board Full-HDDVI Input Board (Digital/Analog) ww DVI input scaling size table DVI format HD/1080i HD/720P SD/NTSC 720  WSXGA+ 1680  UXGA 1600  Page 2-1-11.Displaying the DVI input signal information Dot Clock H-Frequency V-Frequency <DVI-Dformats supported 2-1-12.Adjusting the DVI input signals Automatic adjustment of the black level Automatic adjustment of the white level Initializing the adjusted values 2-2.Output signal settings 2-2-1.Assigning the output signals CLN KeyOut Down Convert 2-2-3.Setting the DVI output signals <Table of DVI output signal settings DVI output signal DVI/Analog Output Board (Digital) Fullx80% Fullx90% Setting the video movement detection sensitivity 2-2-4.Setting the down-converter(option) System image (HD) Output image (SD) 90H(75H) 2-3.Setting the sync signals 2-4.Adjusting the output signal phase <Phase adjustment setup Reference (System standard) AVDL Range • 1H Output <Phases and delay amounts of input/output signals during HD format use Frame synchronizer FS: Output signals Input signals <Phase relationship between input signals and output signals (for 1080/59.94i format) (Example 1) (Example 2) 2-5.Setting the multi view display 2-5-2.Setting the split frame and characters 2-5-3.Setting the tally displays LUM100% Red+Green Red 2-5-4.Changing the material names Preset type setting procedure User type setting procedure 2-5-5.Setting the level meters Left display: Right display: 2-5-7.Setting the markers 4Split 2-6.Setting the ancillary data and embedded audio data 3-1.Setting the system format 3-2.Setting the crosspoints 3-2-2.Setting the crosspoint switching 3-3.Button assignments 3-4.Setting the date and time 3-5.Network settings 3-6.Setting the built-indisplay backlight and button illumination 3-7.Status displays 3-7-3.Displaying the version information and option information Displaying the version information Displaying the option version information 3-8.Initialization 4-1.Setting the GPI I/O ww Control using the GPI Input port Assign Item Description of function assigned Control method ww Output from the GPI Output port AV-HS410 (Max. voltage: 24 V) (Max. current: 50 mA) Tally LED TALLY/GPI 4-2.LAN 4-4.COM 4-3.EDITOR 4-5. Plug-insoftware Sub menu Page Page Page Page Page Page The plug-in name of the registered is sub menu 1080/59.94i: 1080/50i: 1080/24PsF: 1080/23.98PsF: 00s01f to 25s00f 720/59.94p: Page Page Page Page : When the Select item is SDI IN1: SDI IN2 When the Select item is other than SDI IN1: SDI IN1 Page Page Page Parameter 3 Parameter  Analog   Digital  Page Page 1080/23.98PsF:  Soft   FPGA  Word Explanation AB Bus system Ancillary Data Aspect ratio GPI [General Purpose Interface] Hue IRE Key Edge Tally Transition Tri-levelSync Trimming Up Converter MMBackground MMChroma Key MMColor Background MMConfig MMDSK MMInput (SDI) MMKey MMMulti View Display MMOutput MMOutput (Analog) MMTime MMVideo Memory MMXPT