1. Basic operations

1-11-1. Recording still images (Still)

1Press the vbutton to light its indicator, and display the Video Memory menu.

2Use [F1] to display the Video Memory3 sub menu.

3Use [F5] to select “Off” using the Rec Lock item.

ppWhen the unit’s power has been turned back on after it was turned off, the Rec Lock item setting is restored to “On”.

4Use [F1] to display the Video Memory1 sub menu.

5Use [F2] to select “Still1” or “Still2” using the Select item.

6Use [F1] to display the Rec1 sub menu.

7Use [F2] to set the images to appear on the built-in display using the Preview item.

On

The image appearing on the built-in display is

 

forcibly switched to the image to be recorded

 

(AUX1 to AUX4 selected using the V Source

 

item) instead of the material selected by the

 

DISP bus.

Off

The image source selected by the DISP bus

 

is displayed as a preview.

8Use [F3] to set the image to be recorded in the video memory using the V Source item.

AUX1 to

The output signals of the AUX buses (AUX1

AUX4

to AUX4) are recorded as the material.

9Use [F5] to set the review display using the Review item.

On

After the images have been recorded, the

 

images of the video memory recorded in the

 

AUX bus are displayed (for 2 seconds or so).

 

The next images can be recorded even

 

during review display.

Off

The review display is not shown.

Use [F1] to display the Video Memory1 sub menu.

As soon as [F3] (Rec) is pressed, the still images are recorded.

: This function can be actuated in any model whose system version is V2.00.00 and up.

These operations cannot be performed in a model with a system version of below V2.00.00.

ppIf the [VMEM] button on the right of the number keys is pressed and the video memory operation mode has been established, the operation of this button is linked with the [XPT/DSBL] button among the number keys.

ppWhen the recording of the still images is completed, thumbnails of the still images are displayed in the thumbnail screen.

61