1. Basic operations
|
| VECTOR (vectorscope) settings |
|
|
|
|
|
|
WFM (waveform monitor) settings |
|
|
|
|
|
1 Press the [WFM/VECT] button among the display mode buttons to display the waveform monitor on the
2 Press the sbutton to light its indicator, and display the Config menu.
3 Use [F1] to display the WFM sub menu.
4Use [F2] to select the method to be used to display the signal waveforms using the Style item.
Parade | The signal waveforms are arranged and |
| displayed. |
Overlay | The signal waveforms are superimposed onto |
| each other and displayed. |
5Use [F3] to select the signals whose waveforms are to be displayed using the Mode item.
YPbPr | Waveforms of the Y, PB and PR signals are |
| displayed. |
RGB | Waveforms of the R, G and B signals are |
| displayed. |
Y | Waveforms of the Y signal only are displayed. |
1 Press the [WFM/VECT] button among the display mode
buttons to display the vectorscope on the
2 Press the | button to light its indicator, and display the |
Config menu. |
|
3Use [F1] to display the Vector sub menu.
4Use [F2] to select the color bar reference marker using the Bar Target item.
75% | The 75% color bar reference marker is |
| displayed. |
100% | The 100% color bar reference marker is |
| displayed. |
72