2. Input/output signal settings

2-1-2. Setting the input mode

The mode can be set for each input only when HD has been selected as the system format.

When SD is selected as the system format, the input mode is always the same as Normal.

1On the FS sub menu, use [F3] to set the input mode using the Mode item.

Normal

Input signals in conformity with the system format take effect.

Dot by Dot

When SD signals with the same frame rate as the system format have been input, they are input on a dot by dot (1

 

magnification) basis with no up-conversion. (This setting is only possible when the system format is 1080i.)

 

In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to combine SD format

 

material using the PinP function.

Up Convert

When SD signals with the same frame rate as the system format have been input, they are up-converted.

Auto

Input signals in conformity with the system format take effect.

 

Furthermore, if SD signals with the same frame rate as the system format are input when HD is selected as the system

 

format, they are up-converted.

 

In the Auto mode, the images may be disturbed when the input signals are switched.

<List of input modes supported>

 

 

 

 

 

 

Input

 

 

 

 

 

System

Mode

480/

576/

1080/

1080/

1080/

1080/

720/

720/

 

 

 

59.94i

50i

59.94i

50i

24PsF

23.98PsF

59.94p

50p

SD

480/59.94i

 

576/50i

HD

1080/59.94i

Normal

 

 

Dot by Dot

 

 

Up Convert

 

 

Auto

 

 

(Up Convert)

 

 

 

 

 

 

 

 

 

 

 

1080/50i

Normal

 

 

Dot by Dot

 

 

Up Convert

 

 

Auto

 

 

(Up Convert)

 

 

 

 

 

 

 

 

 

 

 

1080/24PsF

Normal

 

 

Dot by Dot

 

 

Up Convert

 

 

Auto

 

1080/23.98PsF

Normal

 

 

Dot by Dot

 

 

Up Convert

 

 

Auto

 

720/59.94p

Normal

 

 

Up Convert

 

 

Auto

 

 

(Up Convert)

 

 

 

 

 

 

 

 

 

 

 

720/50p

Normal

 

 

Up Convert

 

 

Auto

 

 

(Up Convert)

 

 

 

 

 

 

 

 

 

 

ppdenotes a black screen.

ppThe Up Convert mode or Auto mode cannot be selected for inputs 1 to 4.

ppIf Dot by Dot, Up Convert or Auto mode is selected, the frame synchronizer will be turned on. ppThe input mode cannot be changed when freeze is set to on.

77