1. Basic operations
A border or soft effect can be added to PinP.
1Press the pbutton to light its indicator, and display the PinP1 menu (or PinP2 menu).
2Use [F1] to display the Border sub menu.
3Use [F2] to set On (or Off) for the border using the Border item.
4Use [F3] to set the width of the border using the Width item.
5Use [F4] to set the amount of soft effect using the Soft item. The soft effect is OFF if 0.0 is set.
When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width is indicated as the amount of soft effect.
When only the soft effect is to be added to PinP, select “Off” as the Border item setting.
6Use [F5] to set the change in the border width using the Mode item.
Fix | The border width is kept constant. |
Variable | The border width changes to suit the PinP |
| size. |
Setting the border color
1On the PinP1 menu (or PinP2 menu), use [F1] to display the Border Color sub menu.
2Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border color.
ww To call the preset color
Use [F5] to select the preset color using the Load item, and press the [F5].
ppWhen [F5] is pressed, what has been set so far is canceled and replaced with the preset color values.
ppTo save the values that were set before calling the preset color, refer to
33