Panasonic AV-HS410N manual 127

5. Setting menu table

Menu	Sub menu		Parameter 1	Parameter 2	Parameter 3	Parameter 4
	Use [F1] to select.		Use [F2] to select.	Use [F3] to select.	Use [F4] to select.	Use [F5] to select.
Event Memory	Mark	Parameter	PAUSE	CLIP	GPI-Out
		Setting range	On, Off	Clip1, Clip2, Off	GPI-O1 to
					GPI-O19, Off
		Default value	Off	Off	Off
	Event Duration	Parameter	minute	second	frame	Set
		Setting range				Execute
		Default value	0	0	0
	Total Duration	Parameter	minute	second	frame	Set
		Setting range				Execute
		Default value	0	0	0
	Timeline	Parameter	View
		Setting range	Normal, Wide
		Default value	Wide
	Run	Parameter	Run Mode
		Setting range	Repeat, Loop
		Default value	Repeat
	Store Select	Parameter	BKGD	Key	PinP1	PinP2
		Setting range	On, Off	On,Off	On, Off	On, Off
		Default value	On	On	On	On
	Recall Select	Parameter	BKGD	Key	PinP1	PinP2
		Setting range	On, Off	On, Off	On, Off	On, Off
		Default value	On	On	On	On
	XPT Disable	Parameter	BKGD	Key	PinP1	PinP2
		Setting range	On, Off	On,Off	On, Off	On, Off
		Default value	Off	Off	Off	Off
	Register	Parameter	Page	No.	Name	CopyTo ()
		Setting range	1 to 10	1 to 10		1 to 100
		Default value	1	1		1
	Path	Parameter	Effect	PinP Bus	Trans Path	Hue Path
		Setting range	Cut, Dissolve	Cut, Dissolve	Linear, Step	Short, Long,
						CW, CCW, Step
		Default value	Dissolve	Dissolve	Linear	CW
	MEM PVW	Parameter	Mode
		Setting range	MEM-PVW,
			PGM
		Default value	PGM

127