Panasonic AV-HS410N 2-6.Setting the ancillary data and embedded audio data, When an HD format is used:, When an SD format is used:, Setting for the program output signals

2. Input/output signal settings

2-6. Setting the ancillary data and embedded audio data

A function for allowing the V ancillary data and embedded audio data of the SDI input signals to pass through can be set.

When an HD format is used:

The ancillary data starting with line 9 is allowed to pass through.

When an SD format is used:

The ancillary data starting with line 12 is allowed to pass through.

pp When 1080/59.94i, 720/59.94p, 1080/50i or 720/50p has been selected as the unit’s system format setting, it is not possible to allow the ancillary data and embedded audio data to pass through even if SD format signals (480/59.94i

or 576/50i) have been input in the Dot by Dot mode or Up
Convert mode.
 Refer to “2-1-2. Setting the input mode”.
s
1 Press the	button to light its indicator, and display the

System menu.

2Use [F1] to display the Ancillary sub menu.

Setting for the program output signals

3Use [F3] to select “On” or “Off” using the PGM item.

On	The ancillary data and embedded audio data
	of the SDI input materials selected by the
	PGM bus are allowed to pass through.
Off	The ancillary data and embedded audio data
	are not allowed to pass through.

Setting for the preview output signals

4Use [F4] to select “On” or “Off” using the PVW item.

On	The ancillary data and embedded audio data
	of the SDI input materials selected by the
	PST bus are allowed to pass through.
Off	The ancillary data and embedded audio data
	are not allowed to pass through.

Setting for the output signals of the multi view display

5Use [F5] to select “PGM”, “PVW” or “Off” using the MV item.

PGM	The ancillary data and embedded audio data
	of the SDI input materials selected by the
	PGM bus are allowed to pass through.
PVW	The ancillary data and embedded audio data
	of the SDI input materials selected by the
	PST bus are allowed to pass through.
Off	The ancillary data and embedded audio data
	are not allowed to pass through.

Setting for the output signals of the AUX buses (AUX1 to AUX4)

6Use [F2] to select “On” or “Off” using the AUX item.

On	The ancillary data and embedded audio data
	of the SDI input materials selected by the
	AUX bus (AUX1 to AUX4) are allowed to pass
	through.
Off	The ancillary data and embedded audio data
	are not allowed to pass through.

101