1. Basic operations

1-4. PinP (picture in picture)

Another image can be combined with the background image. This unit supports two PinP channels.

1-4-1. Selecting the PinP channel and material

Press the [PinP1] button (or [PinP2] button) among the AUX bus selector buttons.

When the [PinP1] button (or [PinP2] button) is lit, the PinP1 menu (or PinP2 menu) is displayed on the built-in display. The state in which the PinP1 materials (or PinP2 materials) are selected is now established for the AUX bus crosspoint buttons.

The selected AUX bus crosspoint button lights in amber. (It will light in red if the selected signal is a PGM output signal.)

KEY

PinP1

PinP2

DSK

AUX1

AUX2

AUX3

AUX4

DISP

MV

PVW

PGM

 

AMBER : FILL / GREEN : SOURCE

AUX BUS DELEGATION

 

 

 

AUX/DISP SOURCE

 

 

 

 

 

 

AUX

 

 

 

 

 

 

 

 

 

 

SHIFT

1-4-2. Transition between PinP materials

When a PinP bus material has been selected, the effect to be produced when images are switched can be executed as a MIX transition. (Bus transition function)

pp When one material set to the Dot by Dot mode and another material have been switched, cut switching where

the images change in an instant is performed. t

1 Press the

button to light its indicator, and display the

Time menu.

 

2Use [F1] to display the PinP1 BUS Trans sub menu (or PinP2 BUS Trans sub menu).

3Use [F3] and [F4] to set the transition time.

4Use [F5] to set enable or disable for the bus transition function.

Enable EnableDisable Disable

While the transition is underway, the indicator of the transition source button lights, and the indicator of the transition destination button blinks.

When the transition is completed, the indicator of the transition source button goes off, and the indicator of the transition destination button lights.

When another signal has been selected while a transition is underway, the processing for the transition will continue from the interim point.

29