1. Basic operations
Operate the wipe direction selector buttons to select the wipe direction for the background transition.
(The key transitions are set by the menu. The direction which is set here will not be reflected.)
See
A | N |
|
| R | N/R | |
|
|
| ||||
| A | B | B | A | A | B |
B |
|
|
|
|
|
|
A |
|
|
|
|
|
|
| B | A | A | B | A | B |
B |
|
|
|
|
|
|
Wiping proceeds in the normal direction.
When the [R] indicator is lit:Wiping proceeds in the reverse direction.
When the [N/R] indicator is lit:The normal direction is replaced with the reverse direction (or vice versa) when the transition is completed.
(The lit and extinguished statuses of the [R] button are also switched in line with the direction of the wiping.)
A border effect or soft effect can be added to the wiping of background transitions.
Setting the border and soft effect1Press the bbutton to light its indicator, and display the Background menu.
2Use [F1] to display the Border sub menu.
3Use [F2] to set On (or Off) for the border using the Border item.
4Use [F3] to set the width of the border using the Width item.
5Use [F4] to set the amount of soft effect using the Soft item.
When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width is indicated as the amount of soft effect.
When only the soft effect is to be added to wipe, select “Off” as the Border item setting.
Setting the border color1On the Background menu, use [F1] to display the Border Color sub menu.
2Use [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border color.
ww To call the preset colorUse [F5] to select the preset color using the Load item, and press the [F5].
ppWhen [F5] is pressed, what has been set so far is canceled and replaced with the preset color values.
ppTo save the values that were set before calling the preset color, refer to
11