1. Basic operations
Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator lights in amber) and DSK source signal (indicator lights in green).
<Selecting the DSK fill signal>While the indicator of the [DSK] button is lit in amber, press one of the AUX bus crosspoint buttons 1 to 12 to select the DSK fill signal.
The indicator of the selected AUX bus crosspoint button lights in amber. (It lights in red if the selected signal is being output from the PGM connector.)
KEY | PinP1 | PinP2 | DSK | AUX1 | AUX2 | AUX3 | AUX4 | DISP | MV | PVW | PGM |
| AMBER : FILL / GREEN : SOURCE | AUX BUS DELEGATION |
|
|
| AUX/DISP SOURCE | |||||
|
|
|
|
|
| ||||||
AUX |
|
|
|
|
|
|
|
|
|
| SHIFT |
Lighting in amber
<Selecting the DSK source signal>While the indicator of the [DSK] button is lit in green, press one of the AUX bus crosspoint buttons 1 to 12 to select the DSK source signal.
The indicator of the selected AUX bus crosspoint button lights in green. (It lights in red if the selected signal is being output from the PGM connector.)
Since the luminance key is operated as a self key, the key fill signals are used as the key source signals. When the luminance key has been selected as the downstream key type, the key signals will remain unchanged even when the key source signals are switched.
KEY | PinP1 | PinP2 | DSK | AUX1 | AUX2 | AUX3 | AUX4 | DISP | MV | PVW | PGM |
| AMBER : FILL / GREEN : SOURCE | AUX BUS DELEGATION |
|
|
| AUX/DISP SOURCE | |||||
|
|
|
|
|
| ||||||
AUX |
|
|
|
|
|
|
|
|
|
| SHIFT |
Lighting in green
1 Set the transition time.
Press the button to light its indicator, and display the Time menu.
2Use [F1] to display the DSK sub menu.
As with background transitions, set the transition time. Refer to
3When the [DSK ON] button in the transition area is pressed, the DSK image is combined (fades in) for the length of the transition time that has been set.
During
36