Panasonic AV-HS410N 1-3-2.Selecting the key material, Bus, Matte, Chroma On, Chroma Off, <Selecting the key fill signal, <Selecting the key source signal

1. Basic operations

4When the luminance key has been selected, the chroma component can be included in the generation of the key signals in view of the self key application. (This does not apply to the linear key.)

Use [F3], and select the setting using the Lum Key item.

Chroma On In addition to the luminance component, the chroma component is also taken into account in the generation of the key signals.

This is the setting for using a color with a low luminance component for the key signals (such as when defining blue characters).

Chroma Off The key signals are generated from only the luminance component.

5Use [F4] to select the fill type using the Fill item.

Bus	The bus signal is used for the key fill signal.
Matte	The internal fill matte is used for the key fill
	signal.

1-3-2. Selecting the key materialSelecting the key fill and key source signals

Press the [KEY] button in the AUX bus selection area, and switch the selection of the key fill signal (indicator lights in amber) and key source signal (indicator lights in green).

<Selecting the key fill signal>

With the indicator of the [KEY] button lit in amber, press one of the AUX bus crosspoint buttons 1 to 12 to select the key fill signal.

The indicator of the selected AUX bus crosspoint button lights in amber. (It will light in red if the selected signal is being output from the PGM connector.)

KEY	PinP1	PinP2	DSK	AUX1	AUX2	AUX3	AUX4	DISP	MV	PVW	PGM
	AMBER : FILL / GREEN : SOURCE		AUX BUS DELEGATION						AUX/DISP SOURCE
			AUX BUS DELEGATION						AUX/DISP SOURCE
AUX											SHIFT

Lighting in amber

<Selecting the key source signal>

With the indicator of the [KEY] button lit in green, press one of the AUX bus crosspoint buttons 1 to 12 to select the key source signal.

The indicator of the selected AUX bus crosspoint button lights in green. (It will light in red if the selected signal is being output from the PGM connector.)

Since the luminance and chroma keys are operated as self keys, the key fill signals are used as the key source signals. When the luminance key or chroma key has been selected as the key type, the key signals will remain unchanged even when the key source signals are switched.

KEY	PinP1	PinP2	DSK	AUX1	AUX2	AUX3	AUX4	DISP	MV	PVW	PGM
	AMBER : FILL / GREEN : SOURCE		AUX BUS DELEGATION						AUX/DISP SOURCE
			AUX BUS DELEGATION						AUX/DISP SOURCE
AUX											SHIFT

Lighting in green