1. Basic operations

1-2-4. Setting the wipe start position

Wipe start can be set at any desired position.

Target patterns:

WIPE1: 5

WIPE2: 4, 5, 6, 7

SQ1: 5

SQ2: 4, 5, 6, 7

The WIPE pattern is set using the WIPE Position sub menu of the Background menu (or Key menu).

In the same way, the SQ pattern is set using the SQ Position sub menu of the Background menu (or Key menu).

1Press the bbutton (or kbutton) to light its indicator, and display the Background menu (or Key menu).

2Use [F1] to display the WIPE Position sub menu (or SQ Position sub menu).

3Either operate the positioners or use [F2] and [F3] to set the wipe start position using the X-Pos item and Y-Pos item.

This setting is possible only if the target pattern has been selected for the background or key pattern.

4Either operate the fader lever or press the [AUTO] button to check the wipe operation.

(When, for instance, –50 has been set for X-Pos and –50 for Y-Pos, the following screen (or key) appears from the bottom left and wipe is performed while the screen (or key) moves to the screen center.)

<X-Pos,Y-Pos setting range>

Inside screen area

Outside screen area

5To copy the start position setting, press [F5] (Copy to Key or Copy to BKGD).

The background setting is copied to the key setting while the key setting is copied to the background setting.

1-2-5. Modifying wipeSetting the 3D (page turning) effect

A lighting effect can be added to a wipe pattern. Alternatively, the page turning effect parameter can be set. These effects can be set for background transitions and key transitions.

Target patterns: 3D1: 1, 3, 7, 9

1Press the bbutton (or kbutton) to light its indicator, and display the Background menu (or Key menu).

2Use [F1] to display the 3D Modify sub menu.

3Use [F2] to select whether the lighting effect is to be added using the Light item.

On

The lighting effect is added.

Off

The lighting effect is not added.

4Use [F3] to set the size when images have been reduced using the Size item.

5Use [F4] to set the radius of the page turning effect using the Radius item.

6Use [F5] to set the direction of the page turning effect using the Angle item.

12