1. Basic operations
1Press the vbutton to light its indicator, and display the Video Memory menu.
2Use [F1] to display the Video Memory2 sub menu.
3When [F2] (LEAD) is pressed, the current position is moved to the first (head) frame; conversely, when [F3] (LAST) is pressed, the current position is moved to the last frame.
ppWhen the [VMEM] button located on the right of
the number keys is pressed and the video memory operation mode 0has been.established, the operation
of number keys and become linked.
: This function can be actuated in any model whose system version is V2.00.00 and up.
These operations cannot be performed using the number keys with models whose system version is below V2.00.00.
Trimming moving imagesThe position where the playback of the moving images is to start (IN point) and the position when it is to end (OUT point) can be set.
1Press the [VMEM] button on the right of the number keys to establish the video memory operation mode.
2Use the number keys to stop the moving images at the position where the images are to be trimmed (IN point or OUT point).
3Trim the moving images by operating the buttons below.
9Sets the trimming IN point.
6Sets the trimming OUT point.
CReleases the trimming settings.
ppThe trimmed moving images are played back from the IN point to the OUT point, however you can move anywhere in the section from the start point to the1end2point0of the
.recorded moving images by operating , , and
.
ppTrimming can be set and released over and over again until the moving images are stored on the memory card.
ppWhen the moving images are saved on an memory card, only the trimmed parts are saved and the parts no longer required are deleted.
: This function can be actuated in any model whose system version is V2.00.00 and up.
These operations cannot be performed using the number keys with models whose system version is below V2.00.00.
| 7 | 8 | 9 | XPT | MENU | |||||
| NEW | COPY | PASTE | DSBL | INPUT | |||||
| STILL 1 | STILL 2 | TRIM IN | REC |
|
| ||||
| 4 | 5 | 6 | � / + | VMEM | |||||
| INS | DEL | MOD | PAGE |
|
| ||||
| CLIP 1 | CLIP 2 | TRIM OUT | STOP |
|
| ||||
| 1 | 2 | 3 |
|
|
|
| BKGD | ||
| < | > | REV | TAKE | PATT | |||||
|
|
|
|
|
|
| ||||
| < | > | REV | ENTER |
|
| ||||
| 0/10 | . | C |
|
|
|
| KEY | ||
|
|
|
|
| ||||||
| << | >> | UNDO |
|
|
|
| PATT | ||
| << | >> | TRIM OFF | PLAY |
|
| ||||
MEMORY / WIPE PATTERN / 10 KEY |
|
|
|
|
| |||||
|
|
|
|
| ||||||
|
|
|
|
| ||||||
7 |
| Selects Still1 as the operation target. |
|
| ||||||
|
|
|
|
| ||||||
8 |
| Selects Still2 as the operation target. |
|
| ||||||
|
|
|
|
| ||||||
4 |
| Selects Clip1 as the operation target. |
|
| ||||||
|
|
|
|
| ||||||
5 |
| Selects Clip2 as the operation target. |
|
| ||||||
|
|
|
|
|
|
|
|
| ||
9 |
| Sets the trimming IN point. |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
6 |
| Sets the trimming OUT point. |
|
|
|
|
|
| ||
|
|
|
| |||||||
C | Releases the trimming settings. |
|
| |||||||
|
|
| ||||||||
1 |
| Plays back the moving images one frame at a time in | ||||||||
| the reverse direction. |
|
|
|
|
|
| |||
|
|
| ||||||||
2 |
| Plays back the moving images one frame at a time in | ||||||||
| the forward direction. |
|
|
|
|
|
| |||
|
|
|
|
| ||||||
3 |
| Sets the playback direction to reverse. |
|
| ||||||
| (Button indicator lights: reverse direction; indicator off: | |||||||||
|
| forward direction) |
|
|
|
|
|
| ||
0 |
| Transfers to the start frame of the moving images, and | ||||||||
| stops. |
|
|
|
|
|
|
|
| |
|
|
| ||||||||
. |
| Transfers to the end frame of the moving images, and | ||||||||
| stops. |
|
|
|
|
|
|
|
| |
|
|
|
|
| ||||||
T |
| Plays back the moving images. |
|
| ||||||
|
|
|
|
| ||||||
X |
| Starts recording the moving images. |
|
| ||||||
|
|
| ||||||||
P |
| Stops the recording or playback of the moving images. | ||||||||
|
|
|
|
|
|
|
|
|
|
|
65