1. Basic operations

1-1-5. Manual transition

Operate the fader lever to execute transitions manually.

If the fader lever has been operated during auto transition, auto transition will be switched to manual operation as soon as the fader position overtakes the amount of the transition being executed.

The bus tally LEDs on the left of the fader lever indicate the program bus output status.

Top LED only lights

PGM/A bus output

Top and bottom

During the transition

LEDs light

 

Bottom LED only

PST/B bus output

lights

 

1-1-7. Cut transition

When the [CUT] button is pressed, the transition is executed instantly.

1-1-6. Auto transition

ppWhen the [AUTO] button is pressed, the transition is executed automatically using the transition time which has been set.

ppThe transition is executed in the remaining time when the [AUTO] button is pressed while the fader lever is being operated.

pp The auto transition time is set using the Time menu.

1 Press the button to light its indicator, and display the Time menu.

2Use [F1] to display the BKGD sub menu.

3Set the transition time.

When setting the transition time in frame units Use [F4] to set the transition time in frames.

When setting the transition time in second units Use [F3] to set the time in seconds and [F4] to set it in frames.

The display unit is set by selecting Config menu Operate sub menu Time Unit item.

Sec

The time is displayed as a number of

 

seconds.

Frame

The time is displayed as a number of frames.

Any time from 0 to 999f can be set. The time which can be set when seconds are used as the display unit differs depending on the system format.

59.94i:

max. 33s09f

59.94p:

max. 16s39f

50i:

max. 39s24f

50p:

max. 19s49f

24PsF:

max. 41s15f

23.98PsF:

max. 41s15f

9