Panasonic AV-HS410N CLIP, PAUSE, Registering marks, Setting the event duration, Setting the total duration, Setting events using the menus

1. Basic operations

Setting events using the menusRegistering marks

Marks can be registered and events inserted at the event points.

ppPause

ppClip playback ppGPI-Out output

1 Use 0, 1, 2and .to select the event where the

mark is to be registered or the event inserted. e

2 Press the	button to display the Event Memory
menu.

3Use [F1] to display the Mark sub menu.

4Use [F2] (PAUSE item), [F3] (CLIP item) or [F4] (GPI-Out item) to select the item.

PAUSE	When “On” is selected and the mark is
	registered in the event point, playback is
	paused at the mark position during event
	playback.
	“” appears above the timeline.
CLIP	When “Clip1” or “Clip2” is selected and the
	mark is registered in the event point, the clip
	is played back at the mark position during
	event playback.
	“ ” appears above the timeline.

GPI-OutWhen a GPI output port from “GPI-O1” to “GPI-O19” is selected and the mark is registered in the event point, pulse signals are output from the GPI Output port at the mark position during event playback.

“” appears above the timeline.

For the Config menu  GPI-Out Port 1/5 sub menu to GPI-Out Port 5/5 sub menu  Assign item, check that the selected GPI output port is set to “Event MEM”.

5 Press 6to register4the mark.

In addition, press to insert the event.

To cancelC the mark registration or event insertion, press

the button.

Setting the event duration

The lengths0of the1events2 can.be set.

1 Use , , and to select the event to be modified.

2 Press the ebutton to display the Event Memory menu.

3Use [F1] to display the Event Duration sub menu.

4Use [F2] (minute item: minutes), [F3] (second item:

seconds) and [F4] (frame item: frames) to set the event length.

5 Press [F5] to enter the duration.C

To cancel what has been modified, press the button.

Setting the total duration

The total length of all the events from start to end can be set. When the total duration is changed, the durations of the events contained in the event memories are re-calculated using the duration ratio prior to the change.

However, the shortest duration of an event cannot be shorter than one frame.

1Press the [EVENT MEM] button and light its indicator.

2PressPthe [RECALL] button to light its indicator, and use

the button and number keys (1 to 10) to select the

event memory to be modified.

 Refer to “1-10-3. Recalling the operations stored in

the memory (Recall)”. e

3 Press the	button to display the Event Memory
menu.

4Use [F1] to display the Total Duration sub menu.

5Use [F2] (minute item: minutes), [F3] (second item:

seconds) and [F4] (frame item: frames) to set the event length.

6Press [F5] to enter the duration.

ppIf no more events can be contained in the total duration which already has many events and which has been changed, the number of frames will be forcibly adjusted.