1. Basic operations
When [F5] (Stop) is pressed, the recording of the moving images is stopped.
: This function can be actuated in any model whose system version is V2.00.00 and up.
These operations cannot be performed in a model with a system version of below V2.00.00.
ppIf the [VMEM] button on the right of the number keys is pressed and the video memory operation mode has been established,P the operation of this button is linked
with the button among the number keys. ppThumbnails of moving images are displayed on the
thumbnail screen.
While the thumbnails are displayed, the following information is also displayed on the thumbnail screen.
Current playback position (time), IN point position, OUT point position
ppWith the moving images on which the key signals are recorded, a yellow “” mark is displayed for the thumbnail icons.
ppThe recording time is displayed in the Total Time item of the Video Memory3 sub menu.
Also, “On” is displayed for the Key item when the key signals have been recorded.
: This function can be actuated in any model whose system version is V2.00.00 and up.
These operations cannot be performed in a model with a system version of below V2.00.00.
Data for images stored in the video memory can be retained even when the power is turned off, by saving them in the flash memory area.
Whether to automatically save the image data stored in the video memory when the data is transferred from the AUX bus or to manually save them must be set.
Care must be taken when selecting manual saving, as image data stored in the video memory will be lost if the power is turned off before the saving operation is completed.
1Press the vbutton to light its indicator, and display the Video Memory menu.
2Use [F1] to display the Memory sub menu.
3Use [F2] to select the saving method using the Mode item.
Auto | Automatic saving |
Manual | Manual saving |
4Use [F3] to select the video memory for saving data in the flash memory area using the Select item.
When “All” has been selected, all the video memories are saved.
5Press the [F5] (Save) to save data in the flash memory area.
ppThe [F5] (Save) becomes enabled when “Manual” is selected in the Mode item.
ppWhen, in the case of the settings below, [Stop] ([F5] of the Video Memory sub menu) is pressed while video memory recording is in progress, the video memories are saved in the flash memory area immediately after [Stop] has been pressed.
Memory sub menu “Mode” item: “Auto”
Rec2 sub menu “Loop” item: “On”
However, if the power is cut off during recording, the video memories will not be saved in the flash memory area.
63