3. System settings

3-8. Initialization

3-8-1. Initializing setting data

Initialization returns the set data to the factory shipment status.

The user can select one of two modes in which to initialize the data, namely, “Mode A” or “Mode B”.

<Items and data which are not initialized> ppAll plug-in menus

(In “Mode A”, these menus are initialized.) ppThe items of the System menu listed below: Network1, Network2, Network3, Date, Time

1Press the sbutton to light its indicator and display the System menu.

2Use [F1] to display the Initial sub menu.

3Use [F2] to select the initialization mode (“Mode A” or “Mode B”).

4Press [F2] to proceed with the initializing.

ppOnce initialization has been completed the power of the unit shuts off and turns back on again automatically.

3-8-2. Initializing fader

The range for executing a transition can be initialized by operating the fader lever.

Initialization should be performed when transitions are not completed to the end even when the fader lever has been moved as far as it will go.

1Press [F3] in the Initial sub menu to perform initialization.

2When initializing, use [F3] to select “Yes” and press the [F3].

When not initializing, use [F3] to select “No” and press the [F3].

110