1. Basic operations
Before an memory card is used in this unit, the card must be initialized by the unit without fail.
By initializing the memory card formats (in compliance with the SD standard) it creates the dedicated directory.
(All files saved on the memory card will be erased.)
1 Insert the memory card into the unit’s memory card slot.
2 Press the vbutton to light its indicator, and display the SD Card menu.
3 Use [F1] to display the File1 sub menu.
4Use [F2] to select “Init” using the Mode item, and then press the [F2].
If the memory card has not been inserted, “No Card” will appear at the Mode item.
5Press the [F1] (OK) to initialize the card.
Before using a memory card in this unit, initialize it. This unit also supports SDHC memory cards.
Memory cards can be initialized no matter whether they are SD or SDHC memory cards.
1 Insert the memory card which has been initialized by the unit, into the memory card slot.
2 Press the vbutton to light its indicator, and display the SD Card menu.
3Use [F1] to display the File1 sub menu.
4Use [F2] to select “Save” using the Mode item, and then press the [F2].
5Use [F3] to select the data which is to be stored on the memory card using the Save Type item.
The filename provided automatically is displayed in the File Name item.
Filenames are provided automatically using the running number as shown below.
<Saving the video memories, shot memory data, Event memory data and setup data>
hs001.xxx to hs100.xxx
ppWhen changing a filename, press [F4] to open the keyboard screen, input the filename, and close the keyboard screen.
Refer to
<Saving the all files and log files>
hs001 to hs100
ppThe name of the folder where the all files and log files are saved serves as the filenames of the all files and log files.
The filenames of the all files and log files cannot be changed on the keyboard screen.
6If the [F5] (Save) is now pressed, the file is stored on the memory card.
For the destinations where the data is stored, refer to <Data folder configuration>.
ppWhen storing video memory still images, the file format can be selected.
On the SD Card menu, use [F1] to display the File2 sub menu, and select the format of the file to be used when storing the data on the memory card using the Format item.
69