2. Input/output signal settings

2-1-6. Setting the up-converter

Select the settings for SDI IN5 to SDI IN8, as well as for the up-converter that is built into the option boards listed below:

ppAV-HS04M1 (SDI Input Board)

ppAV-HS04M2 (Analog Input Board)

ppAV-HS04M6 (Analog Composite Input Board)

1On the Input sub menu, use [F2] to select the input to be set using the Select item.

Refer to “2-1. Input signal settings”.

2Use [F1] to display the Up Converter1 sub menu.

3Use [F2] to select the scaling system using the Scale item.

Squeeze The image is enlarged both horizontally and vertically to fill the entire screen.

Edge Crop The aspect ratio of the image is maintained, the image size is increased in accordance with the vertical resolution, and black bands are added at the left and right.

Letter Box The aspect ratio of the image is maintained, the image size is increased in accordance with the horizontal resolution, and the image is cropped at the top and bottom.

Input image

 

Squeeze

 

 

 

 

 

 

 

 

 

 

Edge Crop

 

Letter Box

 

 

 

 

 

 

 

 

 

 

4Use [F3] to set the image movement detection sensitivity using the Move Detect item.

1Toward still images

 

3Standard

 

5Toward moving images

5Use [F4] to set the extent of the edge sharpness for the images using the Sharp item.

1Not sharp edges

 

3Standard

 

5Very sharp edges

6Use [F5] to adjust the input image size (100 % to 110 %).

Fine-tuning of image positions

Fine-tuning of image positions is performed when “Edge Crop” is selected for the scaling method.

1Use [F1] to display the Up Converter2 sub menu.

2Use [F2] to select the image position using the Edge Crop Pos item.

Center

The image is positioned at the center, and

 

black images are added at the left and right.

Right

The image is positioned at the right, and a

 

black image is added at the left.

Left

The image is positioned at the left, and a

 

black image is added at the right.

Setting the gamut limiter

1On the Up Converter2 sub menu, use [F4] to set the color range of the input signals using the Limiter item.

Off

The color range is not restricted.

108The amplitude level of the colors (R, G and

B)is restricted to 0 % - 108 %.

104The amplitude level of the colors (R, G and

B)is restricted to 0 % - 104 %.

100The amplitude level of the colors (R, G and

B)is restricted to 0 % - 100 %.

79