1. Basic operations
These steps are taken to mask the DSK signals using the mask signal of the box pattern.
1Press the dbutton to light its indicator, and display the DSK menu.
2Use [F1] to display the Mask sub menu.
3Use [F2], and select the masking method using the Mask item.
Off | The DSK signals are not masked. |
Manual | The area that is set using the Mask Adjust |
| sub menu is masked. |
4:3 | The signals are masked to the 4:3 aspect |
| ratio. |
4Use [F3] to set whether to invert the mask signal using the Invert item.
On | The mask signal is inverted. |
Off | The mask signal is not inverted. |
5Use [F1] to display the Mask Adjust sub menu.
6Use [F2] to [F5] to set the area to be masked.
Operation/ | Description of | Setting range/ | |
Parameter | setting | Initial value | |
F2/ | DSK left position | −50.00 to 50.00/ | |
Left | −25.00 | ||
| |||
F3/ | DSK top position | −50.00 to 50.00/ | |
Top | 25.00 | ||
| |||
F4/ | DSK bottom position | −50.00 to 50.00/ | |
Bottom | −25.00 | ||
| |||
F5/ | DSK right position | −50.00 to 50.00/ | |
Right | 25.00 | ||
|
The Left setting cannot exceed the Right setting (and vice versa) and, similarly, the Top setting cannot exceed the Bottom setting (and vice versa).
<DSK mask setting> (figure shows the default values)
Video signal range
Area where the DSK signal is effective
Area masked
50
TOP (25)
0 BOTTOM
0 | (25) | 50 | |
LEFT |
| RIGHT |
|
39