2. Input/output signal settings

2-2-1. Assigning the output signals

The output signals can be assigned to the SDI OUT1 to SDI OUT5 connectors and DVI OUT connector.

1On the Output sub menu, use [F2] to select the output to be set using the Select item.

Refer to “2-2. Output signal settings”.

2Use [F1] to display the Assign sub menu.

3Use [F2] to set the type of output signal using the Source item.

PGM

An image provided with the wipe, mix, key,

 

downstream key or other effect is output at

 

the switcher’s main line output.

PVW

This is the preview output that enables the

 

next operation to be checked before it is

 

executed.

AUX1 to 4

The signals selected by the 4 lines of AUX

 

buses (AUX1 to AUX4) are output.

CLN

The clean signal (the image resulting when

 

the key, downstream key or other effect

 

has been removed from the PGM signal) is

 

output.

 

Refer to “Assigning the CLN signal”.

MV

The multi view display signals are output.

 

Multiple input signals and output signals are

 

reduced in size and output to one screen.

KeyOut

The key signal is output.

MEM-PVW

In the memory preview mode, the shot

 

memory and event memory effects are output

 

to preview.

4Use [F3] to set the output mode using the Mode item.

Normal

The same signals as the system format

 

signals are output.

Down

This can be selected when the SDI output

Convert

board (option: AV-HS04M7) has been

(down-

connected.

converter)

When the system format is 1080/59.94i or

 

720/59.94p, the signals are output in the

 

480/59.94i format.

 

When the system format is 1080/50i or

 

720/50p, the signals are output in the 576/50i

 

format.

 

When the system format is SD (480/59.94i or

 

576/50i), this setting cannot be selected.

Assigning the CLN signal

Set KEYCLN or DSKCLN as the CLN output.

1Press the sbutton to light its indicator, and display the Config menu.

2Use [F1] to display the Assign sub menu.

3Use [F3] to select the type of output signal using the CLN item.

Key

The PGM signals minus the key effects are

 

output.

 

The Key, PinP1, PinP2 and DSK effects are

 

not added.

DSK

The PGM signal minus the downstream key

 

effects are output.

2-2-2. Setting the SDI output color range

The color range can be set for the SDI output signal images.

ppThe same setting applies to all the SDI output signals.

1 On the Output sub menu, use [F5] to set the color range using the SDI Limit item.

Refer to “2-2. Output signal settings”.

Off

The color range is not restricted.

108The amplitude level of the colors (R, G and

B)is restricted to 0 % - 108 %.

104The amplitude level of the colors (R, G and

B)is restricted to 0 % - 104 %.

100The amplitude level of the colors (R, G and

B)is restricted to 0 % - 100 %.

89