2. Input/output signal settings

2-5-4. Changing the material names

The material names of the input signals (SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2, IN-B1 or IN-B2) to be set on the multi view display can be changed.

These names can be selected from the default settings or user settings.

When the preset settings and user settings are established, the material name (CAM1, etc.) is displayed.

1On the Input sub menu, use [F2] to select the input to be set using the Select item.

Refer to “2-1. Input signal settings”.

2Use [F1] to display the Name sub menu.

3Use [F2] to select the type of material names using the Type item.

Default

Select the material names from the following:

(default

SDI IN1 to SDI IN8, DVI IN, IN-A1, IN-A2,

settings)

IN-B1 and IN-B2.

User

The material names are set using up to 7

(user

characters.

settings)

 

Preset type setting procedure
User type setting procedure

1On the Name sub menu, use [F2] to select “User” using the Type item.

2Press [F3] to display the keyboard screen.

3Using [F1] to [F3], input the name, and press [F4].

To clear the name which has been input and close the keyboard screen, press [F5].

Refer to “2-2-2. Keyboard screen operations” (<Basics> Operating Instructions).

1On the Name sub menu, use [F2] to select “Preset” using the Type item.

2Use [F3] to select the material name using the Name item.

99