3. System settings
3-1. Setting the system format
One system format (input/output signal) can be selected.
1Press the sbutton to light its indicator, and display the System menu.
2Use [F1] to display the Format sub menu.
3Use [F2], select the format using the Format item, and press the [F2] to enter the selection.
Setting the 16:9 squeeze modeWhen the 16:9 squeeze mode is selected, a border width (wipe or PinP) is established that considers cases where SD format images are to be converted into the 16:9 aspect ratio and used.
This setting is possible when SD is selected as the system format setting.
On the Format sub menu, use [F4] to select whether to support the squeeze mode using the 16:9 Squeeze item.
On | The squeeze mode is supported. |
Off | The squeeze mode is not supported. |
Border width (graphical representation) when the squeeze mode is supported
Squeeze (4:3) | 16:9 |
102