3. System settings

3-3. Button assignments

3-3-1. Setting the user buttons

The user can assign several functions which can be set using the menu items into eight user buttons (U1 to U8).

The user buttons light in amber when the assigned function is ON and are off when the assigned function is OFF.

Each time the user button is pressed, the function setting alternates between ON and OFF.

The table below lists the functions which can be assigned to the user buttons (U1 to U8).

Function name

Description of function

Key PVW

Output the key image to the preview output.

PinP PVW

Outputs the PinP1 and PinP2 images

 

simultaneously to the preview output.

PinP1 PVW

Output the PinP1 image to the preview output.

PinP2 PVW

Output the PinP2 image to the preview output.

DSK PVW

Output the DSK image to the preview output.

GPII-EN

Enables or disables GPI-In.

GPIO-EN

Enables or disables GPI-Out.

SHIFT

Switches all the A/B bus and AUX bus

 

crosspoints between front and rear.

AUX Trans

Enables or disables the AUX bus transitions.

PinP Trans

Enables or disables the PinP bus transitions.

EFF DSLV

Switches effect dissolve between ON and

 

OFF.

Default settings

Button

Function name

Button

Function name

U1

KEY PVW

U5

AUX Trans

U2

PinP PVW

U6

EFF DSLV

U3

DSK PVW

U7

SHIFT

U4

PinP Trans

U8

None

ppWhen a plug-in software application is introduced, the functions inherent to that application are sometimes added as the functions which are assigned.

: This function can be actuated in any model whose system version is V2.00.00 and up.

These operations cannot be performed in a model with a system version of below V2.00.00.

1Press the sbutton to light its indicator, and display the Config menu.<Setting method>

2Use [F1] to display the User Button1 sub menu and User Button2 sub menu.

ppUser Button1 sub menu

3Use [F2] to select the function to be assigned to the [U1] button using the User1 item.

4Use [F3] to select the function to be assigned to the [U2] button using the User2 item.

5Use [F4] to select the function to be assigned to the [U3] button using the User3 item.

6Use [F5] to select the function to be assigned to the [U4] button using the User4 item.

ppUser Button2 sub menu

7Use [F2] to select the function to be assigned to the [U5] button using the User5 item.

8Use [F3] to select the function to be assigned to the [U6] button using the User6 item.

9Use [F4] to select the function to be assigned to the [U7] button using the User7 item.

Use [F5] to select the function to be assigned to the [U8] button using the User8 item.

105