1. Basic operations

1-4-3. Selecting Shape

Square, Circle, Heart, Star or Flower can be selected as the shape used for combining PinP images.

1Press the pbutton to light its indicator, and display the PinP1 menu (or PinP2 menu).

2Use [F1] to display the PinP sub menu.

3Use [F2] and, using the Shape item, select the shape used for combining images.

4Use [F3] to adjust the transmissivity (darkness) applying when the images are combined using the Density item.

1-4-4. PinP preview

Select whether to output the PinP1 and PinP2 preview images to the preview output.

1On the PinP sub menu, use [F5] to set the PVW item.

On

An image with the PinP1 (or PinP2) effect

 

added is output to the preview output.

Off

An image without the PinP1 (or PinP2) effect

 

added is output to the preview output.

ppThe PVW On and Off settings can be allocated to the user buttons.

When “PinP1 PVW” (or “PinP2 PVW”) is assigned to a user button, the PinP1 image (or PinP2 image) preview output is turned on or off every time the user button is pressed.

When “PinP PVW” is assigned to a user button, the PinP1 image and PinP2 image preview outputs are simultaneously turned on or off every time the user button is pressed.

Refer to “3-3-1. Setting the user buttons”.

1-4-5. PinP transitions

1Set the transition time.

On the Time menu, use [F1] to display the PinP1 sub menu (or PinP2 sub menu).

As with background transitions, set the transition time. Refer to “1-1-6. Auto transition”.

2When the [PinP1 ON] button (or [PinP2 ON] button) in the transition area is pressed, the PinP1 image (or PinP2 image) transitions (fades in) for the length of the transition time that has been set.

During fade-in, the [PinP1 ON] button (or [PinP2 ON] button) blinks in red, and when the transition is completed, it lights in red.

When the [PinP1 ON] button (or [PinP2 ON] button) is pressed after fade-in is completed, the PinP1 image (or PinP2 image) transitions (fades out).

During fade-out, the [PinP1 ON] button (or [PinP2 ON] button) lights in red, and when the transition is completed, it goes off.

If the [PinP1 ON] button (or [PinP2 ON] button) is pressed at any point during a transition, the direction of the transition is reversed.

30