• RECORDER ALARM
Select ON or OFF to accept or not accept recorder alarm input signals.
ON: Accepts recorder alarm input signals.
OFF: Not accepts recorder alarm input signals.
• SERIAL ALARM
Select ON or OFF to accept or not accept serial alarm input signals.
ON: Accepts serial alarm input signals.
OFF: Not accepts serial alarm input signals.
• VIDEO LOSS
Select ON or OFF to accept or not accept video loss input signals.
ON: Accepts video loss input signals.
OFF: Not accepts video loss input signals.
●TERMINAL ALARM Menu
330 | TERMINAL ALARM |
|
|
|
| |||
| INPUT | BOARD=8 |
|
|
|
| ||
ALM |
|
| ALM |
| ALM |
| ALM |
|
225 |
| N.O. | 233 | N.C. | 241 | N.O. | 249 | N.C. |
226 |
| N.O. | 234 | N.C. | 242 | N.O. | 250 | N.C. |
227 |
| N.O. | 235 | N.C. | 243 | N.O. | 251 | N.C. |
228 |
| N.O. | 236 | N.C. | 244 | N.O. | 252 | N.C. |
229 |
| N.O. | 237 | N.C. | 245 | N.O. | 253 | N.C. |
230 |
| N.O. | 238 | N.C. | 246 | N.O. | 254 | N.C. |
231 |
| N.O. | 239 | N.C. | 247 | N.O. | 255 | N.C. |
232 |
| N.O. | 240 | N.C. | 248 | N.O. | 256 | N.C. |
ALM=ALARM | IN |
| N.O.:NORMALLY | OPEN |
| |||
|
|
|
|
| N.C.:NORMALLY | CLOSE | ||
|
|
|
|
|
|
|
|
|
• INPUT BOARD
Select a video input board from 1 to 8. (The factory default is 1.
• ALM
Select the alarm contact type for each terminal alarm input signal. (The factory default is N.O.)
N.O.: Normally Open contact
N.C.: Normally Close contact
■RECORDER
You will check the settings of DATA ports to connect recorders and CAMERA IN connectors to supply video input signals from recorders. When you select RECORDER on the top menu, the following menu is displayed.
Note: Before the settings, check the system composition and refer to p. 63 Recorder Connection.
400 | RECORDER |
|
| 1 | of | 2 | |||
| RECORDER | OUT | INPUT | BOARD8 |
|
| |||
| RECORDER | DATA | CAM |
|
|
|
|
|
|
| 01 | HDR1 | 256 |
| ON |
|
|
| |
| 02 | HDR1 | 255 |
| ON |
|
| ||
| 03 | HDR1 | 254 |
| ON |
|
| ||
| 04 | HDR1 | 253 |
| ON |
|
| ||
| 05 | HDR2 | 252 |
| ON |
|
| ||
| 06 | HDR2 | 251 |
| ON |
|
| ||
| 07 | HDR2 | 250 |
| ON |
|
| ||
| 08 | HDR2 | 249 |
| ON |
|
| ||
DATA=DATA(TMNL/PSD/HDR) |
|
|
|
|
|
| |||
CAM=CAMERA | IN |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |||
400 | RECORDER |
|
| 2 | of | 2 | |||
| RECORDER | OUT | INPUT | BOARD8 |
|
| |||
| RECORDER | DATA | CAM |
|
|
|
|
|
|
| 09 | HDR3 | 248 |
| ON |
|
|
| |
| 10 | HDR3 | 247 |
| ON |
|
| ||
| 11 | HDR3 | 246 |
| ON |
|
| ||
| 12 | HDR3 | 245 |
| ON |
|
| ||
| 13 | HDR4 | 244 |
| ON |
|
| ||
| 14 | HDR4 | 243 |
| ON |
|
| ||
| 15 | HDR4 |
|
| OFF |
|
| ||
| 16 | HDR4 |
|
| 0FF |
|
| ||
DATA=DATA(TMNL/PSD/HDR) |
|
|
|
|
|
| |||
CAM=CAMERA | IN |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
• RECORDER OUT
Select the video input board or external monitor to supply video input signals from recorders.
Refer to p. 63 for connections.
INPUT BOARD1 to 8: Recorder images are displayed on monitors connected to the unit.
EXTERNAL INPUT: Recorder images are displayed on external monitors directly connected to recorders.
• RECORDER
Select the desired recorder. 1 to 16 are the recorder unit addresses. (The factory default is ON.)
ON: The recorder is used.
OFF: The recorder is not used.
• DATA
DATA ports used for the recorder connections are dis- played. DATA port setting is performed in DATA PORT. (Refer to p. 90.)
• CAM
Camera input channel numbers to supply video input sig- nals from recorders are displayed. (When RECORDER OUT is set to EXTERNAL INPUT, "-
50
