Sequence Pause

You can pause an active tour or group sequence. When a group sequence is paused on a monitor, all sequences will be simultaneously paused on other monitors.

1.Press the SEQ PAUSE (or PAUSE) button. Sequence will be paused.

2.Press the SEQ PAUSE (or PAUSE) button again to restart the sequence.

Available operations during sequence pause

Sequence step forward/backward

You can move the sequence one frame to the next or previous step by pressing the + or – button.

Camera control

You can control the camera whose image is being dis- played on the monitor.

Sequence Stop

When a tour or group sequence is stopped, the camera at the stopped step will be selected. When a group sequence is stopped on a monitor, all sequences will be simultane- ously stopped on other monitors.

WV-CU950/650

Press the SEQ STOP button while holding down the SHIFT button.

Sequence will be stopped.

WV-CU360C/CJ

Press the STOP button.

Sequence will be stopped.

Notes:

Sequence will also be stopped when you select a camera during the sequence is activated. Then, the image of selected camera will be displayed on the monitor.

65

Page 65
Image 65
Panasonic WJ-SX650 manual Sequence Pause, Sequence Stop, Available operations during sequence pause