Problem

Auto tracking ended before the end time of camera event setting.

Alarm event does not occur.

The image of camera associ- ated with the alarm event was not recorded.

The status before the alarm occurrence is not recovered, even though the alarm event is reset.

Alarm modes of connected devices are not reset even after the unit is powered off.

Cannot open SETUP MENU of the unit.

Check item and remedy

 

 

 

Reference

• Check if another camera event is not set for the camera.

 

 

 

 

 

 

 

 

 

35

• Check if the alarm input signal setting is ON in ALARM of

 

 

86

 

 

 

 

SETUP MENU.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Check if the alarm event has been set.

29

 

 

 

 

 

Check if the deactivation period is scheduled for the alarm

 

90

 

event. (Check the alarm schedule setting.)

 

 

 

 

 

• Check if the alarm is not suspended and SETUP MENU is

 

 

 

16, 83

 

 

 

 

 

 

not open on the associated monitor.

 

 

 

 

 

 

Check the connection and settings between the recorder and

 

 

 

 

 

 

 

 

 

the unit.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording follows the recorder settings.

 

 

 

Check the event recording setting of recorder.

 

 

 

 

 

 

 

 

 

 

 

 

If an operator has activated a group sequence before the

 

 

 

 

 

 

 

 

alarm occurrence, and another operator reset the alarm or

 

 

 

 

performed operations on the monitor associated with the

 

 

 

group sequence, the status before the alarm occurrence is

 

 

 

 

not recovered.

 

 

 

 

• When you power off the unit, the alarm mode activated for

 

 

 

 

 

 

 

 

 

 

 

 

the unit is reset, but the alarm modes for the connected

32

devices are not reset. Power on the unit again, and perform

 

 

 

 

alarm reset.

 

 

 

 

• You cannot open SETUP MENU when another operator is

 

 

 

 

 

 

 

 

 

opening it.

 

 

 

 

 

 

 

• SETUP MENU cannot be displayed on a monitor associated

 

 

 

 

 

 

 

 

 

with an active alarm.

 

 

 

 

 

 

 

 

 

 

 

 

92

Page 92
Image 92
Panasonic WJ-SX650 manual Check if the alarm event has been set