WV-CU360C/CJ

This operation is not available.

Recorder Control End

Before this operation, stop playback or search playback surely.

To finish recorder control, select a camera.

The monitor display will become the status before recorder control.

WV-CU360C/CJ

1.Enter the desired recorder number by pressing the numeric buttons. The entered number will appear on the LCD.

2.Press the RECORDER button. The recorder will be selected.

Recorder Selection

Before recorder control procedures not described in this chapter, you need to select a recorder in advance. In the following example, you will open SETUP MENU of Recorder 16.

WV-CU950/650

1.Enter the desired recorder number by pressing the numeric buttons. The entered number will appear on the LCD.

2.Press the RECORDER button. The recorder will be selected.

3.Press the MENU button repeatedly until "System Setup" appears on the LCD.

4.Press the F1 button. SETUP MENU of recorder will be displayed on the selected monitor.

Note: To close the SETUP MENU, press the F2 button.

3.Press the SETUP button while holding down the SHIFT button. SETUP MENU of recorder will be displayed on the selected monitor.

Notes:

To close the SETUP MENU, press the F2 button.

If a selected recorder directly connects an external monitor, black screen will be displayed on the monitor with the message "RECORDER CONTROL". Refer to p. 64 for connection.

61

Page 61
Image 61
Panasonic WJ-SX650 manual Recorder Control End, Recorder Selection