Panasonic WJ-SX650 manual Wiper, Off

Function	WV-CU950/650	WV-CU360C/CJ	Note
Auto pan	Open "Auto Pan Setup" menu.	[SHIFT] + [CAM FUNC] four
	→	times
		(AUTO MODE setting menu
		appears on the monitor. )→
• Activates the auto pan.	[F1]	[1]	WV-CU360C/CJ:
			Pressing [AUTO PAN] is also
			available.
• Reverses the auto pan	[F2]	Not available
range.
• Sets the start point of auto	[F3]	Not available
pan.
• Sets the end point of auto	[F4]	Not available
pan.
Auto mode	Open "Auto Mode" main	[SHIFT] + [CAM FUNC] four
	menu. →	times (AUTO MODE setting
		menu appears on the monitor.
		)→
• Sequence	[F1]	[3]
• Sort	[F2]	[2]
• Auto pan	[F3]	[1]
• Patrol	[F4]	Refer to p. 41 Patrol.
BW Mode Switching	Open "BW Mode" main menu.	[SHIFT] + [CAM FUNC] two
	→	times (BW setting menu
		appears on the monitor. )→
• Changes to the BW mode.	[F1]	[1]
• Changes to the color mode.	[F2]	[2]
• AUTO 1	[F3]	Not available	WV-CU950/650:
			If the camera has only one
			AUTO mode, press this but-
			ton.
• AUTO 2	[F4]	Not available
AUX 1/2			WV-CU950/650, WV-
			CU360C/CJ:
<Latch mode>			• Mode setting is determined
			by the DIP switch settings of
• AUX 1 (or 2) ON	[AUX1 (or 2) ON]	[SHIFT] + [AUX1 (or 2) ON]
			camera or auxiliary device
• AUX 1 (or 2) OFF	[SHIFT] + [AUX1 (or 2) OFF]	[SHIFT] + [AUX1 (or 2) OFF]	(receiver, etc.).
			• To activate events
			(sequence, etc.), set the
			camera or auxiliary device
			to the latch mode. (Refer to
			the operating instructions of
			camera.)
<Momentary mode>			WV-CU950/650, WV-
AUX 1 (or 2) ON	[AUX1 (or 2) ON]	[SHIFT] + [AUX1 (or 2) ON]	CU360C/CJ:
	(Keep pressing.)	(Keep pressing.)	When you release the but-
			ton(s), auxiliary control
			becomes OFF.
Wiper ON	[WIPER]	[SHIFT] + [WIPER] (Keep	WV-CU950/650, WV-
	(Keep pressing.)	pressing.)	CU360C/CJ:
			When you release the but-
			ton(s), wiper control becomes
			OFF

79