Problem

Check item and remedy

Reference

 

 

• Check the LCD (or LED) display or indicators of system con-

troller. When "Busy (or BUSY)" is blinking (or lighting),17, 18 recorder control is not available.

• Depending on the recorder status, response may be delayed.

Check the status and retry the control.

Cannot control a recorder.

"RECORDER ERROR" is dis- played on the monitor, and recorder control is unavail- able.

During sequence, black screen and "NOT ASSIGNED" are displayed on the monitor.

Auxiliary control does not become OFF even after the sequence, timer event, or alarm event ends.

Timer event or camera event is not activated.

• Did you control the recorder on the recorder front panel?

 

Soon after that, control from system controllers may become

unavailable. Wait for a moment and retry the control.

 

 

 

Check if Monitor 2 is selected with the MONITOR1/MONI- TOR2 button of recorder. (Refer to the operating instructions of recorder for details.)

As the unit is connected to the MONITOR OUT 2 connector

of recorder, do not select Monitor 1 with the

 

MONITOR1/MONITOR2 button of recorder. When you have

 

 

selected Monitor 1, perform an operation that is available for

 

 

Monitor 2 only (playback, etc.). Monitor 2 will be selected

 

 

automatically.

 

 

• Check the connection and settings between the recorder and

 

63

 

the unit.

 

 

 

• Check if the recorders version is correct.

 

 

 

 

 

 

WJ-HD300 Series: Ver. 1.61 or later

 

63

WJ-HD300A Series: Ver. 3.10 or later

 

 

 

 

 

Check if the sequence setting contains LCN's not registered.

26

• If the sequence, timer event, or alarm event has turned on

 

 

 

 

 

 

 

 

 

the auxiliary control, the auxiliary control does not become

 

 

23

OFF automatically. Turn off the auxiliary devices manually, or

 

 

 

 

 

set an event that turns off the auxiliary control.

 

 

 

• If the timer event or camera event is set to be activated at the

 

 

 

 

34, 35, 85

 

start time of the summer time (daylight saving time), the

 

 

 

 

event will not be activated.

 

 

 

• If the setting data is uploaded after the start time, the event

 

 

34, 35

 

 

 

 

will not be activated.

 

 

 

 

• Timer event will not be activated when monitors are selected

 

 

 

 

 

 

 

 

 

by operators with higher priority than the timer event, display-

 

34

ing SETUP MENU, or being in the alarm mode.

 

 

 

 

 

 

 

91

Page 91
Image 91
Panasonic WJ-SX650 manual Problem Check item and remedy