Panasonic WJ-SX650 manual Camera Control, Camera Selection, Preset Position Control

CAMERA CONTROL

The following is the procedure examples for camera selec- tion. Refer to p. 36 Lists of Functions and Operations for other camera control procedures not described here.

■Camera Selection

In the following procedure, you can display the image of desired camera on the selected monitor.

1.Enter the desired camera number by pressing the numeric buttons. The entered number will appear on the LCD.

<WV-CU950/650><WV-CU360C/360CJ>

2.Press the CAM (SET) button. The specified camera number will appear on the LCD, and the system will become ready for camera control.

<WV-CU950/650><WV-CU360C/360CJ>

3. Control the selected camera.

•When you select another camera or camera position, the memorized steps are updated.

•When you select another monitor, the memorized steps will be cleared.

●WV-CU360C/CJ

This operation is not available.

■Preset Position Control

By entering preset position numbers, you can move cam- eras to preset positions. Refer to p. 36 Lists of Functions and Operations for how to register preset positions.

1.Enter the desired preset position number by pressing the numeric buttons. The entered number will appear on the LCD.

<WV-CU950/650><WV-CU360C/360CJ>

2.Press the PRESET (or CALL PRESET) button. The cam- era will move to the specified preset position.

<WV-CU950/650><WV-CU360C/360CJ>

■Camera Selection Recall

Every time you select a camera or camera position, a sys- tem controller memorizes up to 10 steps of camera selec- tion. You can recall these steps in order or reverse order. In the following procedure, you can track back camera images or camera positions formerly displayed.

●WV-CU950/650

Press the – button while holding down the HISTORY button. The camera image formerly selected will be displayed on the selected monitor.

(Example: Camera 128 → 3)

Notes:

•To return to the camera images more recently selected, press the + button while holding down the HISTORY button. The camera image more recently selected will

be displayed on the selected monitor. (Example: Camera 3 → 128)

Notes:

•If you press no numeric buttons in Step 2, the cam- era will move to the home position.

•By activating a group preset, two or more cameras can be moved to preset positions at a time. (Refer to p. 27.)

58