MONITOR CONTROL

The following is the procedure examples for monitor selec- tion. Refer to p. 36 Lists of Functions and Operations for other monitor control procedures not described here.

Monitor Selection

In the following procedure, you can display camera images or perform setup procedures on a desired monitor.

1.Enter the desired monitor number by pressing the numeric buttons. The entered number will appear on the LCD.

<WV-CU950/650><WV-CU360C/360CJ>

2.Press the MON (ESC) button. The specified monitor will be selected, and the system will become ready for monitor control.

<WV-CU950/650><WV-CU360C/360CJ>

3. Control the selected monitor.

Monitor Lock

When you log out of the system or select another monitor, this function can prevent operators with lower priority from gaining control of the selected monitor and camera(s).

WV-CU950/650

1.Press the MON LOCK button. The selected monitor will be locked.

2.To release the monitor lock, press the MON LOCK but- ton again.

WV-CU360C/CJ

1.Press the MON LOCK button while holding down the SHIFT button.

The selected monitor will be locked.

2.To release the monitor lock, press the MON LOCK but- ton again.

Notes:

Monitor lock is released when you select the monitor again, or an operator with higher priority selects the monitor.

Even after you log out of the system or select another monitor, the camera image or sequence is continuously displayed on the selected monitor.

57

Page 57
Image 57
Panasonic WJ-SX650 manual Monitor Control, Monitor Selection, Monitor Lock