Panasonic WJ-SX650 manual Recorder, Input Board

RECORDER	CAMERA IN No.	CAM (Camera input channel No.: Video Input board 1 to 8)
No.
		INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT	INPUT
		BOARD	BOARD	BOARD	BOARD	BOARD	BOARD	BOARD	BOARD
		1	2	3	4	5	6	7	8
1	32	32	64	96	128	160	192	224	256
2	31	31	63	95	127	159	191	223	255
3	30	30	62	94	126	158	190	222	254
4	29	29	61	93	125	157	189	221	253
5	28	28	60	92	124	156	188	220	252
6	27	27	59	91	123	155	187	219	251
7	26	26	58	90	122	154	186	218	250
8	25	25	57	89	121	153	185	217	249
9	24	24	56	88	120	152	184	216	248
10	23	23	55	87	119	151	183	215	247
11	22	22	54	86	118	150	182	214	246
12	21	21	53	85	117	149	181	213	245
13	20	20	52	84	116	148	180	212	244
14	19	19	51	83	115	147	179	211	243
15	18	18	50	82	114	146	178	210	242
16	17	17	49	81	113	145	177	209	241

Notes:

•ON is not available for recorders when camera input channels are set for RS-485 cameras. To activate recorder connec- tions, delete the RS-485 camera settings. (Refer to p. 92.)

•For camera input channels to supply video input signal from recorders, set DATA to OFF. The VD2 and DATA settings are performed in VD2/DATA/CABLE COMPENSATION. (Refer to p. 91.)

•Set LCN parameters surely for these camera input channels, even though these channels accept video input signals from recorders. Without LCN settings, recorder selection is unavailable. The channel settings are performed in "System" – "Recorder" of WJ-SX650 Series Administrator Console.

•Be sure to connect the recorders to the specified DATA ports in the daisy chain. (Refer to p. 63 for connections.)

•Be sure to supply the video input signals from recorders to the specified camera input channels.

51