Tour Sequence

WV-CU950/650

1.Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD.

2.Press the TOUR SEQ button. The tour sequence will be activated.

Group Sequence/Preset

WV-CU950/650

1.Select a monitor assigned for desired group sequence/preset. (Refer to p. 21 Monitor Selection.)

2.Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD.

3.Press the GROUP SEQ button while holding down the SHIFT button. The group sequence will be activated.

WV-CU360C/CJ

1.Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD.

2.Press the SEQUENCE button. The tour sequence will be activated.

WV-CU360C/CJ

1.Select a monitor assigned for desired group sequence/preset. (Refer to p. 21 Monitor Selection.)

2.Enter the desired sequence number by pressing the numeric buttons. The entered number will appear on the LCD.

3.Press the GROUP SEQ button. The group sequence will be activated.

Notes:

If you have specified Group Sequence 9 to 32 in Step 2, group preset will be activated. The system status will be the same as that after camera selection.

Group sequence/preset will not be activated for moni- tors selected by operators with higher priority or restricted by the monitor access setting

When a monitor assigned for the active group sequence is controlled by a higher-level operator, you cannot control the monitor. (Monitor busy)

64

Page 64
Image 64
Panasonic WJ-SX650 manual Tour Sequence, Group Sequence/Preset