Panasonic WJ-SX650 manual Operation Other than Terminal Mode, PS·Data Mode Operations

OPERATION (OTHER THAN TERMINAL MODE)

This chapter includes notifications on operations from sys- tem controllers in the PS·Data mode, a web browser accessing the recorder, or a PC.

■PS·Data Mode Operations

Note: When using a system controller in the PS·Data mode, check the software version.

The available software versions are as follows. WV-CU950/650:Ver. 2.00 or later WV-CU360C/CJ:Ver. 8.10 or later

The following is the restrictions of PS·Data mode opera- tions. Refer to the operating instructions of system con- troller for details.

• Login

Log into the system by entering the user ID and password registered in the system controller. After login, you can control the unit as a PS·Data operator. PS·Data operator setting is performed in "Operator" – "Operator" of WJ-SX650 Series Administrator Console.

• Logout

Auto logout is not available. Log out from the system manu- ally.

• Camera selection

When using WV-CU360C/CJ, you cannot select Camera 200 or greater.

• Camera position

When using WV-CU950/650, camera positions registered in the system controller are activated. (Up to 999 camera positions are available.) This function is not available with WV-CU360C/CJ.

• Camera selection recall

Camera selection steps are memorized in the system con- troller. (Even when you select another monitor, the memo- rized steps are not cleared.) This function is not available with WV-CU360C/CJ.

• Preset

When using WV-CU360C/CJ, you cannot select Preset Position 065 or greater.

• Recorder selection

You cannot select a recorder by entering the recorder num- ber. To select the recorder, enter the logical camera num- ber associated with the camera input channel connected to the recorder.

• Recorder control

When using WV-CU360C/CJ, refer to the operating instruc- tions of recorder.

• Alarm

Alarm ACK, alarm individual reset, and alarm monitor reset are not available. (Alarm all reset is available.) When con- trolling Alarm History Display from WV-CU360C/CJ, you cannot skip to 10 pages forward or backward. (Refer to p. 39.)

• Error message display

When you fail in operations, error messages (Not Avail and Prohibited) will not be displayed on the LCD (or LED).

You cannot control the following functions by pressing the associated buttons on system controllers. Control them by entering the system function numbers. (When using WV- CU950/650, you can specify the system functions marked with "*" either by pressing the numeric buttons or recalling the menu functions on the LCD.)

•WV-CU950/650

1.Enter the system function number by pressing the numeric buttons.

2.Press the SYS FUNC*1 (or FUNCTION*2) button while holding down the SHIFT button.

*1 WV-CU950/650 *2 WV-CU360C/CJ

System function	System function number
Monitor lock ON/OFF*	101
System status display ON/OFF	102
Time and date information*	104
Camera information ON/OFF*	105
Event information*	106
Monitor status ON/OFF*	107
All home positions ON/OFF	120
All auxiliaries ON/OFF	121

85