Reference No. | Explanation |
|
|
15 | 2005 to 2099: Year |
|
|
16 | 1 to 12: Month |
|
|
17 | 1 to 31: Day |
|
|
18 | |
| |
|
|
19 | 00 to 59: Minute |
|
|
20 | AM, PM: Morning, Afternoon |
|
|
21 | DD/MM/YYYY, MM/DD/YYYY, YYYY/MM/DDDD, DD/Mmm/YYYY, Mmm/DD/YYYY: Date Format |
|
|
22 | Japanese, English, French*, Spanish*, German*, Italian*, and Russian*: Language |
| * In the actual display, these parameters are displayed in their own languages. |
|
|
23 | |
| |
|
|
24 | Date |
|
|
25 | Way to press keys |
| A to Z: Click each key while holding down the SHIFT key. |
| a to z: Click each key. |
| 0 to 9: Click each key. |
|
|
26 | 1 to 32: Page |
|
|
27 | Available parameters: 1 to 9999 |
|
|
28 | Available parameters: 1 to 999 |
| Note: You can select logical camera numbers that have been set in "System" – "Logical Camera Number". |
|
|
29 | Available parameters: 1 to 256 |
|
|
30 | 1 to 32: Tour sequence No. |
|
|
31 | Available parameters: 1 to 9999 |
| Note: You can select camera position numbers that have set in "Camera" – "Camera Position". |
|
|
32 | Available parameters: Blank, 1 to 256 |
|
|
33 | ON: Activate, OFF: Not activate, |
|
|
34 | 1 to 30 sec: Dwell |
|
|
35 | 1 to 32: Group Sequence No. |
|
|
36 | 1 to 32: Monitor No. |
|
|
37 | 1 to 99: Priority |
|
|
38 | 1 to 30 sec: Dwell Time |
|
|
39 | OFF: Auto reset is OFF. |
| 1 to 10 sec, 20 sec, 30 sec, 1 min, 3 min, 5 min: Alarms are reset after this period. |
|
|
40 | N.O.: Normally Open contact |
| N.C.: Normally Close contact |
|
|
41 | 1 to 256: Terminal Alarm |
| 1 to 999: Camera Alarm, Recorder Alarm, Video Loss |
| Note: You can select camera numbers that have set in "System" – "Logical Camera Number". |
| 1 to 1024: Serial Alarm |
|
|
42 | When Display Mode is set to SPOT, up to 8 events can be added. |
|
|
43 | 1 to 64: Alarm schedule No. |
| Note: You can select only registered schedules. |
| OFF: Always Active |
|
|
44 | SPOT: Displays a spot camera image |
| |
| |
| Note: You can select available events only. |
|
|
45 | 1 to 999: Recording Source (LCN) |
| When an alarm event occurs, a command alarm specifying the LCN of recording source camera is transmit- |
| ted to the recorder. |
| Note: Recording follows the settings of command alarm and event recording. Refer to the operating instruc- |
| tions of recorders. |
43