Panasonic WJ-SX650 manual Setup Menu OSD, Basic Operations, Top Menu

SETUP MENU (OSD)

This chapter explains about SETUP MENU (On-screen Display setup menu) of this unit.

■Basic Operations

To control SETUP MENU, display SETUP MENU on a moni- tor.

●WV-CU950/650

1.Select a desired monitor. (Refer to p. 21 Monitor Selection.)

2.Press the MENU button repeatedly until "System Setup" appears on the LCD.

3.Press the F1 button. SETUP MENU will be displayed on the selected monitor.

●WV-CU360C/CJ

1.Select a desired monitor. (Refer to p. 21 Monitor Selection.)

2.Press the SETUP button while holding down the SHIFT button.

SETUP MENU will be displayed on the selected monitor.

●Top Menu

When SETUP MENU is opened, the top menu is displayed on the monitor.

WJ-SX650 SETUP MENU
100	TIME&DATEO
300	ALARMO
400	RECORDERO
500	SYSTEMO
800	INFORMATIONO
900	LANGUAGE	ENGLISH

Moves the cursor: Move the joystick. The cursor is highlight- ed when you point.

Moves to the next/previous page (When the displayed menu has two or more pages): Move the cursor to the top or bottom. The next or previous page will be displayed on the monitor.

Note: When using WV-CU950/650, you can perform this operation by rotating the shuttle ring or moving the zoom wheel controller.

Changes the selected parameter: Rotate the JogDial, or press the + or – button.

Enter the numeric parameter: Press the numeric buttons. To clear the numeric entry, press the CLEAR button.

Moves to the lower menu: Move the cursor to a setting item which has an arrow mark, and then press the CAM (SET) button.

Moves to the upper menu: Press the MON (ESC) button.

Exits the SETUP MENU: When using WV-CU950/650, press the F2 button. When using WV-CU360C/CJ, press the SETUP button while holding down the SHIFT button.

Notes:

•Sequence is stopped on monitors displaying SETUP MENU.

•Alarms are not activated on monitors displaying SETUP MENU.

48