Panasonic WJ-SX650 ALM Recall, Ack, Shift + ACK, ALM Reset, Shift + ALM Suspend Shift + Suspend

Function	WV-CU950/650	WV-CU360C/CJ	Note
System Status Display	Open "System Status" main
	menu. →
• Opens System Status	[F1]	[OSD] + [SYS S]
Display.
• Closes System Status	[F2]	[OSD] + [SYS S]
Display.
Alarm History Display	[ALM RECALL]	[OSD] + [ALM H]	WV-CU950/650, WV-
			CU360C/CJ:
			Every pressing the buttons
			can display or hide Alarm
			History Display.
			Note: Alarm History Display is
			not available on monitors
			in the alarm mode or dur-
			ing recorder selection.
<While displayed>
• Goes to the next or previous	• [+] or [–]	• [NEXT] or [PREV]
page.	• Joystick CDAB	• Joystick CDAB
• Skips to 10 pages forward.	• Shuttle ring clockwise
	• Zoom wheel controller to the	Not available
	right
• Skips to 10 pages back.	• Shuttle ring counterclock-
	wise	Not available
	• Zoom wheel controller to the
	left
Alarm Acknowledgement	[ACK]	[ACK]
(ACK)
<During alarm ACK>
• Displays the next alarm pic-	[+]	[NEXT]
ture.
• Displays the previous alarm	[–]	[PREV]
picture.
• Alarm recover	[SHIFT] + [ACK]	Not available
Alarm reset			WV-CU950/650, WV-
			CU360C/CJ:
			If Display Mode is set to OFF,
			an alarm will not be acknowl-
			edged. The alarm will be
			reset by every pressing the
			ACK button.
• Alarm individual reset	[ACK] (During alarm ACK)	[ACK] (During alarm ACK)
• Alarm monitor reset	[ALM RESET]	[RESET]
• Alarm all reset	[SHIFT] + [ALM ALL RESET]	[SHIFT] + [ALL RESET]
Alarm suspension	[SHIFT] + [ALM SUSPEND]	[SHIFT] + [SUSPEND]	Every pressing these buttons
			will activate or cancel alarm
			suspension.

76