78
• Starts the patrol setting. [F1] [2]
• Ends the patrol setting. [F2] [3]
• Activates the patrol play. Refer to p. 42 Auto mode. [1]
Patrol
Focus control
• Brings the lens focus farther
from the object.
[FOCUS FAR] [FOCUS FAR] WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
farther from the object while
this button is held down.
• Brings the lens focus nearer
from the object.
[FOCUS NEAR] [FOCUS NEAR] WV-CU950/650, WV-
CU360C/CJ:
Lens focus will keep going
nearer from the object while
this button is held down.
• Adjusts the lens focus auto-
matically.
[B] or top button [FOCUS FAR] + [FOCUS
NEAR]
WV-CU950/650:
You can assign another func-
tion to these buttons .
The setting is performed in
"Controller" – "Key
Assignment" of WJ-SX650
Series Administrator Console.
Zoom control
• Widen the scene. Zoom wheel controller to the
left
[ZOOM WIDE] WV-CU950/650:
Lens zooming level will keep
going down while zoom wheel
controller is being moved to
the left.
WV-CU360C/CJ:
Lens zooming level will keep
going down while this button
is held down.
• Zooms the image. Zoom wheel controller to the
right
[ZOOM TELE] WV-CU950/650:
Lens zooming level will keep
going up while zoom wheel
controller is being moved to
the right.
WV-CU360C/CJ:
Lens zooming level will keep
going up while this button is
held down.
Function WV-CU950/650 WV-CU360C/CJ Note
Open "Patrol Learn" menu. →[SHIFT] + [CAM FUNC] three
times (PATROL setting menu
appears on the monitor.) →
WV-CU950/650:
For cameras for which two or
more patrol settings are avail-
able, PATROL 1 is activated.
To perform other patrol set-
tings, open the camera setup
menu or perform the camera
function.
(Refer to the operating
instructions of camera for
details.)