■Installing the Main Unit
Places to avoid
•Places exposed to direct sunlight or near a source of heat such as a radiator
•Very dirty and dusty places
•Places subject to strong vibrations
•Near magnetic field sources such as a television or speakers
•Near
•Near noise sources such as fluorescent lamps
•Places where condensation forms easily
•Humid places
•Places where drastic temperature changes occur
•Places which are not level
•Steamy and oily places such as kitchens
Rack Mounting
When mounting this unit, use the following racks. Standard Rack:
EIA equivalents (Products of other manufacturers): EIA
19 inch rack, 450 mm
Note: When mounting this unit into a rack of another manu- facturer, Rack Mounting Screw
1.Power off the unit.
2.Remove the rubber feet (4 psc.) on the bottom of the unit by loosening the screws.
Matrix Switcher
3.Mount the unit into the rack by fixing the rack mounting screws (locally procured: 8 pcs). (Refer to the following illustration.)
EIA 19 inch rack
to | more |
equivalent | (44mm) or |
| Matrix Switcher |
space | 1 unit |
Make a | approx. |
Matrix | Switcher |
Important:
•If the rack is subject to vibration, secure the rear of the unit to the rack by using additional mounting brackets (locally procured).
•To avoid loosening, secure the mounting screws surely.
•When operating the units, keep the temperature inside the rack surely below 45 °C {113 °F}.
•Mount the unit into the rack with a space equivalent to approx. 1 unit (44 mm) or more to separate from other devices.
•Mounting ventilation fan(s) in the rack is recommended especially when the rack is covered with front lids.
•To prevent the unit from overheating, do not block the ventilation openings or slots in the cover
Remove the rubber feet.
21
