Notes:

Alarm all reset will also be conducted when setting changes are performed in SETUP MENU or WJ-SX650 Series Administrator Console.

To reset the alarms occurred to recorders, perform alarm all reset. Alarm all reset is available even while no alarms are occurring.

WV-CU360C/CJ

Press the OSD and ALM H buttons at a time. The Alarm History Display will appear on the selected monitor.

Return to Alarm Mode Status

You can recover from the ACK status to the alarm mode status.

WV-CU950/650

Press the ACK button while holding down the SHIFT button. The alarm mode will be recovered.

WV-CU360C/CJ

This operation is not available.

Alarm Suspension

You can suspend the unit from accepting alarm input sig- nals when you do not want to be disturbed.

1.Press the ALM SUSPEND*1 (or SUSPEND*2) button while holding down the SHIFT button.

The alarm will be suspended. *1 WV-CU950/650

*2 WV-CU360C/CJ

2.To cancel the alarm suspension mode, press the ALM SUSPEND button while holding down the SHIFT button again.

Alarm History Display

The latest 1 000 alarm records (date, time and details) can be displayed as the alarm history on an active monitor.

Note: Alarm History Display is not available on monitors in the alarm mode or during recorder selection.

WV-CU950/650

Press the ALM RECALL button. The Alarm History Display will appear on the selected monitor.

Details on Alarm History Display

ALARM

HISTORY

 

 

1 of

100

M D Y H M S

ALARM

ACTION

 

REC

Aug31/0611:59:00PM

ALL

12345

K4-8

Aug31/0611:58:00PM

C-999

M32

C100

001

Aug31/0611:57:00PM

V-001

M03

T32

256

Aug31/0611:56:00PM

 

POWER

 

Apr15/0509:15:25AM

 

POWER

 

Apr15/0509:15:25AM

R-003

 

 

 

Apr15/0509:13:54AM

S-0002

M10*G32

———

Apr15/0509:12:32AM

T-001

M20

———

999

Jan02/05

03:05:10PM

S

6789

 

PC

Jan01/05

03:04:08PM

S

101

 

PSD

T-TERMINAL C-CAMERA

 

R-RECORDER

S-SERIAL

V-VIDEO

LOSS

SSUSPEND

 

 

 

 

 

 

 

"" beside the time indicates daylight saving time (sum- mer time).

The following items are display details.

• ALARM (Highlighted for reset alarms)

T-001 to 256: Terminal alarm

(Example: For T-001, "001" means the number of alarm input signal accepted by the ALARM IN port of video input board.)

C-001 to 999: Camera alarm

(Example: For C-001, "001" means the number of camera supplying an alarm input signal to the unit.)

R-001 to 999: Recorder alarm

(Example: For R-001, "001" means the number of camera associated with the recorder supplying an alarm input signal to the unit.)

S-0001 to 1024: Serial alarm

(Example: For S-0001, "0001" means the serial com- mand alarm input number.)

V-001 to 999: Video loss

(Example: For V-001, "001" means the number of camera to which video loss has occurred)

ALL: Alarm all reset

S : Alarm suspension ON/OFF

• ACTION

POWER: The unit is powered on. (Highlighted: Power off)

M01 to 32: Alarm occurred to Monitor 1 to 32. (For group sequence and group preset, the smallest monitor number is displayed with "".)

C001 to C999: Camera 001 to Camera 999 was activat- ed for spot mode.

69

Page 69
Image 69
Panasonic WJ-SX650 manual Return to Alarm Mode Status, Alarm Suspension, Details on Alarm History Display